door jamb wiring boots

[73MACH1WV]

looking for a set of door jamb wiring boots.

 

[Jeff73Mach1]

If you are not doing a concours restoration, these might do the trick.

http://www.summitracing.com/parts/eli-5050-10-099?seid=srese1&gclid=CM_t9a7NwMkCFcQkgQodrKkMbQ


http://www.7173mustangs.com/thread-71-power-window-conversion-wiring-harness-holes?page=2

This thread shows some originals and sources

 

[Gardoco]

If you are not doing a concours restoration, these might do the trick.

http://www.summitracing.com/parts/eli-5050-10-099?seid=srese1&gclid=CM_t9a7NwMkCFcQkgQodrKkMbQ

I looked at these as they seem to look ok but if you check the specification they are only 0.5" I.D. so pretty small!

 

[Jeff73Mach1]

If not looking for original, there are lots of options ie., http://www.jegs.com/i/Electric-Life/366/4301-70-011/10002/-1?parentProductId=755579

http://www.ebay.com/itm/Power-Window-Door-Jamb-Wiring-Boots-Pair-Accordion-Style-/330792076738?hash=item4d04be85c2:g:60cAAOSwo0JWICHa&vxp=mtr

http://www.ebay.com/itm/2000-CHEVROLET-MONTE-CARLO-RUBBER-BOOTS-FOR-DOOR-WIRING-HARNESS-/252180031123?hash=item3ab719e693:g:9~YAAOSwAKxWUOZp&vxp=mtr

or for the hunters in the group, virtually every car in a junkyard made in the last 25 years will have something that could be potentially used.

 

[73MACH1WV]

Thanks guys, I'll check them out,,,,,,,,,,,,,