Drip Rail Molding Seal

[MustangGuy2k]

I have a 72 Mustang and I'm looking for the part number for the seal that goes between the drip rail and the second molding. Can't see to fibd it listed. Was going to just use 3m Sealer but that's a little messy.

Thanks,

 

[Don C]

I believe that this is the original Ford number - ESB-M2Gl50-A, which is no longer available. I would probably use Eastwood seam sealer - https://www.eastwood.com/ew-seam-se...cpc&utm_source=bing&utm_term=4582901939513740, which is much cheaper than the Motorcraft TA-2-B sealer.

​

 

[Doug's 73 Mach1]

3M strip caulk does a good job. Great for sealing drip rail moldings to the body also and other places.

https://www.amazon.com/3M-08578-Bla...39&sprefix=3m+strip+caulk,aps,100&sr=8-3&th=1

 

[Spar_ky]

There are various "Neoprene With Adhesive" strips on Amazon.
Yearone sells a Reproduction roof rail weatherstrip retainer channel to body seal for 1965-1973 Ford Mustang coupe and hatchback models.

https://www.yearone.com/Product/1964-73-mustang/rw657

 

[Spike Morelli]

NPD has what you're looking for. When I painted my car all of the trim was removed, and , yes, there is a special seal that is installed behind that shiny metal weatherstrip retainer. try part # 506AO2-5A. Those self adhesive foam seal strips may come in other widths and thicknesses, so verify that part number.

 

[MustangGuy2k]

Thanks everyone,