- Joined
- Jul 3, 2011
- Messages
- 745
- Reaction score
- 100
- Location
- Northwest Jersey
- My Car
- 1973 Mach 1 original 351C C6 Now 460-4spd top loader
1930 Ford Model A 351C-AOD
Guys,
As I am in the process of installing a Petronix ignition module in a friends 72 Mach and I have a question. The instructions read to connect red wire to a 12V power source without a ballast or resistor wire. I know from previous experience that our cars have a resistor wire in the harness feeding the positive side of the coil. Is the actual resistor wire in the short engine harness that plugs in near the brake booster or some where before that.
Thanks, Jay
As I am in the process of installing a Petronix ignition module in a friends 72 Mach and I have a question. The instructions read to connect red wire to a 12V power source without a ballast or resistor wire. I know from previous experience that our cars have a resistor wire in the harness feeding the positive side of the coil. Is the actual resistor wire in the short engine harness that plugs in near the brake booster or some where before that.
Thanks, Jay