Hamburger's 8qt Oil Pan, 351c

[basstrix]

Hi, I'm looking for feedback on fitment of Hamburger's (Trans-Dapt) 1175 model in our cars. Any known interferences or areas of caution? In the past, I installed a 9qt Milodon deep sump on a 429 and had slight interference with the engine cross member.

This is potentially going on a 351c. Here's link to the pan: https://www.summitracing.com/parts/ham-1175

 

[Hemikiller]

Hamburger's pans are now made in China, and they seem to have forgotten which way an engine rotates as the crank scraper is on the wrong side. Shameless plug for my employer.

https://www.summitracing.com/parts/mor-20558

 

[c9zx]

Hemi, The scraper on the wrong side is hilarious. Thanks for pointing that out. Chuck

 

[tony-muscle]

They are probably designing it so the sump is at the rear which would place the scraper in the correct position.

 

[Hemikiller]

They are probably designing it so the sump is at the rear which would place the scraper in the correct position.

For their sake, I really wish that were true. Look again where the "hump" for the oil pump is.

 

[Tnfastbk]

I have the Moroso and have had no issues with it.

 

[basstrix]

Hamburger's pans are now made in China, and they seem to have forgotten which way an engine rotates as the crank scraper is on the wrong side. Shameless plug for my employer.

https://www.summitracing.com/parts/mor-20558

The scraper rail is actually on both sides. It's not very impressive and seem to be more there for the ability to claim it's a scraper.

Unfortunately, most manufacturing has been moved to China, Mexico, or some other low-wage country. If one knows how to properly spec and control quality, very good products can be obtained from these places.

 

[basstrix]

Any input on the fitment in our models or 70-71 Ranchero/Torino is appreciated.

 

[basstrix]

Hemi, The scraper on the wrong side is hilarious. Thanks for pointing that out. Chuck

It's disappointing that this was incorrectly pointed out.

 

[tony-muscle]

Look at Kevco for other options in the 7 to 8 qt range. I have the F607

https://kevkoracing.com/collections/ford-cleveland

 

[basstrix]

Look at Kevco for other options in the 7 to 8 qt range. I have the F607

https://kevkoracing.com/collections/ford-cleveland

I like the trap door design on this one. The Hamburger's was a Christmas present....just wanting to find out before I install on engine if I'm going to have problems. Thanks.

 

[tony-muscle]

I like the trap door design on this one. The Hamburger's was a Christmas present....just wanting to find out before I install on engine if I'm going to have problems. Thanks.

Can't beat free! The pictures look very good that's all I can say.