Would love some info on your set up ! Those are some really good numbers! Were you on street tires / exhaust etc...? My combination is all wrong.I am due for some upgrades now!
Thanks everyone for the great replies,
It is an all stock street car 3850 lbs with me in it, with full 2.5 exhaust, AC, stock Deluxe interior, and heavy wheels 15x8 255-60 fronts 275-60 rears.
These are the Mods
Subframe connectors, drag shocks, battery in trunk, 4.10 Detroit Locker rear.
Tranny 4r70w with 4000 stall Manual VB with toggle switch for O/D and one for Converter Lockup. (this makes it nice to cruise)
Motor, home built 351C stock 2 bolt block, crank and rods, .030, balanced, rods drilled for floating pins, TRW popup pistons about 11 to 1 comp.
4V closed chamber heads, ported Torker intake, ported to match, Holley750 DP. Lunati Cam Solid flat tappet .610/.615 lift Dur 255/265 @ .050 and matching springs valves etc.
This is a budget build, most everything was purchased thru ebay or used.
I still think there is more in it, since I can remove about 200 lbs by storing the AC for a while and getting some weld drag wheels. My front wheels weigh almost 70 lbs each.
I am sure I left something out.