Parts Wanted Looking for ram air part

[spdbk1]

Need all the under hood parts

 

[jscott]

https://www.npdlink.com/product/air...earch_terms=ram%2Bair&top_parent=200001&year=
https://www.npdlink.com/product/ple...earch_terms=ram%2Bair&top_parent=200001&year=
https://www.kentuckymustang.com/eng...kit-ram-air-system-1971-1973-scott-drake.html


https://www.amazon.com/Mustang-Ram-Breather-Seal-1971/dp/B00VS84E96

 

[spdbk1]

Sorry don't laugh trying to find nos not going to pay 3k for original air cleaner but know it's not going to be cheap lol

 

[jscott]

I am laughing, get that 3K+ out. Might want to check with this seller as he has a ton of NOS parts
I know this is not NOS (that would cost more) but it is close and will get you started: https://www.ebay.com/itm/254348321388?hash=item3b3857626c:g:BdoAAOSwMo9dbUly

 

[PoFoMoCo]

spdbk1 - is this the Black 4-speed car from Houston?

 

[Mike King]

spdbk1 - is this the Black 4-speed car from Houston?

View attachment 71238

Would those hubcaps be factory fitted? I can't recall seeing a Mach1 with sports hubcaps before.

 

[spdbk1]

Yes it is

 

[Motorcity Mustang]

I have a 71 429 Mach 1 with those hubcaps in 15".

 

[spdbk1]

I've heard this was an option can't wait til I see the build option sheet to see how it was ordered

 

[PoFoMoCo]

Yes it is

Awesome, we need more pics!

 

[Bobby]

https://www.npdlink.com/product/air...earch_terms=ram%2Bair&top_parent=200001&year=
https://www.npdlink.com/product/ple...earch_terms=ram%2Bair&top_parent=200001&year=
https://www.kentuckymustang.com/eng...kit-ram-air-system-1971-1973-scott-drake.html


https://www.amazon.com/Mustang-Ram-Breather-Seal-1971/dp/B00VS84E96

Be careful with the plenum mounting screws! They may be a bit too long and poke thru your hood. The screw holes in the plenum do not all match up so you’ll have to drill 3 new holes in the hood. There is one screw at the center of the plenum just in front of the air cleaner hole where the mounting screw is a bit too long. It would be prudent to trim off about 1/8 inch off the crew shaft to avoid putting a bulge on the outside of the hood.

 

[PoFoMoCo]

Great information… Thanks Bobby I’m about to jump into this as well, I’d hate to mess up my new hood and paint!

 

[GARYCOBRAJET]

I have a used factory plenum in great shape for 250 plus shiping. Thanks

 

[Retired2014]

Would those hubcaps be factory fitted? I can't recall seeing a Mach1 with sports hubcaps before.

They were called “Sports Wheel Covers” and now they are ‘wall art’.

 

[Motorcity Mustang]

They were called “Sports Wheel Covers” and now they are ‘wall art’.

I just bought a set of new 15" take-offs. Pretty darn rare to be honest in 15". Glad I had the rims already!!

 

[PoFoMoCo]

..... I just bought a set of new 15" take-offs. Pretty darn rare to be honest in 15".......

Very nice..... But if no pics, no video - then it didn't happen.

 

[Motorcity Mustang]

Very nice..... But if no pics, no video - then it didn't happen.

 

[Sheriff41]

Very cool!

 

[Retired2014]

Nice! I thought the ’missing’ lug nut from one of mine (courtesy of a dimwit wannabe mechanic with a pneumatic wrench at a Firestone front end alignment shop back in the 70’s) was an unusual story until I started looking at fleabay ads for these wheel covers. My sad story apparently wasn’t that unusual after all… The wheel covers do sort of ”resemble” mag wheels, but to a seasoned mechanic that removes wheels all day long??? C’mon. Would have been nice had he ‘fessed up and admitted it as opposed to me finding it two weeks later (relocated to the BACK passenger wheel.) They denied knowledge, of course. I often wonder what the expression was on his face when he ripped a gaping hole in the brand new wheel cover when he anticipated catching a lug nut falling out of the gun to his hand…

 

[spdbk1]

I have a used factory plenum in great shape for 250 plus shiping. Thanks

Do you still have the ram plenum