Lower Control Arm Bolts Camber Adjuster

[eddyw]

Hi,

The previous owner mount standard bolts and nuts and not the control arm bolts for the camber adjustment.

What must i do to replace this?

Please advice.

Eddy

 

[mustang7173]

eddyw,

The safest way to process this exchange would be to remove the coil spring. Also, the kit that you are showing, are prone to movement thus requiring alignment down the road. If your budget allows it, I recommend the Opentracker Lower Control Arm Camber Kit. I have both of my mustangs with these kits installed!

http://www.opentrackerracingproducts.com/camberkit/

Once they are properly aligned, they stay in place. Opentracker also recommends for alignment;

http://www.opentrackerracingproducts.com/tech/

source: Opentracker Racing Products LLC. , copyright: 2013

mustang7173

 

[droptop73]

Don't use those bolts! They look like cheap hardware store grade 5 bolts. I would not use less than grade 8 or OEM bolts on any suspension part. Your life really does depend on them!

 

[eddyw]

Hi Droptop/Mustang7173,

I send a mail to Don(OMS-08/04/13) for asking if he have some bolts for me... but no answer(maybe on vacation).

I need next things:

-a pair fender brackets to installing a front spoiler.

-a pair lower control arm bolts(camber adjusters)

-4 shorter bolts to mount only the water pump pulley(i do not use the aluminum fan spacer, i gone use electric fans)

-complete set for mounting the aluminum nasa engine hood scoop bezel.

Maybe can somebody else help me?

Eddy

Don't use those bolts! They look like cheap hardware store grade 5 bolts. I would not use less than grade 8 or OEM bolts on any suspension part. Your life really does depend on them!

 

[mustang7173]

eddy,

-a pair fender brackets to installing a front spoiler. - Are you talking about the LH and RH brace Front Fender to Apron? Please look at illustration

-a pair lower control arm bolts(camber adjusters) http://www.totalcontrolproducts.com/eccentric.html

--4 shorter bolts to mount only the water pump pulley(i do not use the aluminum fan spacer, i gone use electric fans) HomeDepot , Lowes Home Improvement or ACE Hardware or maybe AMK products- http://www.amkproducts.com/

--complete set for mounting the aluminum nasa engine hood scoop bezel.

Ohio Mustang : http://www.ohiomustang.com/store/order_page.asp?itemid=3246

NPD: http://www.npdlink.com/store/products/mustang_mounting_kit_ram_air_scoops_to-150909-476.html

Bracket

Source: Ford Master Parts, FMC Copyright 1975

mustang7173

 

[OMS]

I thave 3 of the items

PM sent

Don

Fender brackets 12.95

Item #F-1515

68-73 LOWER CONTROL ARM ECCENTRIC MOUNTING KIT

8 Piece Kit. Lower control arms to shock tower cam bolts, eccentrics, nuts and washers. Price: $20.00

scoop bezel nut /studs 19.95

Do not have short water pump bolts

 

[droptop73]

Go to a local hardware for the bolts I think they're 5/16" not sure if 18 or 24 thread. Again this is a great place for some good quality grade 8 bolts.

 

[eddyw]

Hi Don,

PM sent on your website.

Thanks,

Eddy

I thave 3 of the items

PM sent

Don

Fender brackets 12.95

Item #F-1515

68-73 LOWER CONTROL ARM ECCENTRIC MOUNTING KIT

8 Piece Kit. Lower control arms to shock tower cam bolts, eccentrics, nuts and washers. Price: $20.00

scoop bezel nut /studs 19.95

Do not have short water pump bolts