Lowest/furthest back engine mounts

[kblackav8or]

I would like to get my 351 as low and far back as possible. I am going to be running a dry sump pan meaning it is flat on the bottom and only sticks down a couple inches. Really the limitation is the scattershield diamter to ground clearance. What factory frame perch and motor mount combo gets is low and back if any?

 

[Don C]

If I were you I would consider fabricating some mounts using urethane or rubber spring shackle bushings. This way you know you have captive mounts that won't come apart and it would be easy to replace the bushings, when needed, plus you can put the engine right where you want it.

 

[kblackav8or]

Just found these.. Look like they might be the ticket. http://www.fabquest.com/weld-on-adjustable-ford-engine-mounts.html

 

[TommyK]

These are for the earlier stangs but you might get some ideas from the pictures.

http://www.ebay.com/itm/Ford-Adjustable-Motor-Mounts-6110-302-351-260-302-289-Mustang-Cougar-Falcon-V8-/231146610096?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AMustang&hash=item35d1695db0&vxp=mtr