• If you have bought, sold or gained information from our Classifieds, please donate to 7173 Mustangs.com and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Matching #'s 73 Mustang 351CJ engine, 4 speed trans

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

74mach

New member
Joined
Mar 5, 2016
Messages
2
Reaction score
0
Location
ohio
My Car
74 mach 1
#'s matching '73 Mustang 351CJ (Q code 4V) engine and close ratio toploader trans, RUG BJ1. Engine has about 6000 miles since complete balance and blueprint rebuild.

.030 over, Erson Cam (grind RV12H), MSD Pro Billet distributor, Factory cast iron intake replaced with Edelbrock Torker 351 intake and Holley 750 carb (we do not have original intake, carb or distributor) New Flow Tech headers, Carter fuel pump, Starter etc.

Recently dyno tuned at Paul's Automotive Engineering 271RWHP, 302 RWT Comes complete with all front dress incl alternator, PS pump brackets, pulleys etc.

Includes original bellhousing, close ratio toploader, RUG BJ1, complete shifter less handle, trans crossmember, mount and speedometer cable.

Car was built March 7, 1973.

$5000.00

Runs and drives great. Can test drive this weekend before we pull it and start the 5.0 Coyote swap





 
#'s matching '73 Mustang 351CJ (Q code 4V) engine and close ratio toploader trans, RUG BJ1. Engine has about 6000 miles since complete balance and blueprint rebuild.

.030 over, Erson Cam (grind RV12H), MSD Pro Billet distributor, Factory cast iron intake replaced with Edelbrock Torker 351 intake and Holley 750 carb (we do not have original intake, carb or distributor) New Flow Tech headers, Carter fuel pump, Starter etc.

Recently dyno tuned at Paul's Automotive Engineering 271RWHP, 302 RWT Comes complete with all front dress incl alternator, PS pump brackets, pulleys etc.

Includes original bellhousing, close ratio toploader, RUG BJ1, complete shifter less handle, trans crossmember, mount and speedometer cable.

Car was built March 7, 1973.

$5000.00

Runs and drives great. Can test drive this weekend before we pull it and start the 5.0 Coyote swap



Price reduced to $4000. Coyote swap went very well. Owner has a couple thousand miles on the 2017 Coyote.

 
#'s matching '73 Mustang 351CJ (Q code 4V) engine and close ratio toploader trans, RUG BJ1. Engine has about 6000 miles since complete balance and blueprint rebuild.

.030 over, Erson Cam (grind RV12H), MSD Pro Billet distributor, Factory cast iron intake replaced with Edelbrock Torker 351 intake and Holley 750 carb (we do not have original intake, carb or distributor) New Flow Tech headers, Carter fuel pump, Starter etc.

Recently dyno tuned at Paul's Automotive Engineering 271RWHP, 302 RWT Comes complete with all front dress incl alternator, PS pump brackets, pulleys etc.

Includes original bellhousing, close ratio toploader, RUG BJ1, complete shifter less handle, trans crossmember, mount and speedometer cable.

Car was built March 7, 1973.

$5000.00

Runs and drives great. Can test drive this weekend before we pull it and start the 5.0 Coyote swap



Price reduced to $4000. Coyote swap went very well. Owner has a couple thousand miles on the 2017 Coyote.
Still for sale?  Can you send Pics?

 
Back
Top