andy72
Well-known member
- Joined
- Jul 3, 2014
- Messages
- 253
- Reaction score
- 23
- Location
- california, ca
- My Car
- 1972 mach 1 351 ram air
[url=https://ibb.co/R9rNbJs][img]https://i.ibb.co/376vdPj/DSC06636.jpg[/img][/url]
Can someone tell me what the 2 metal tabs are for that are on the roof rail weatherstrip?
I suspect maybe the rear one is to hold the top of the quarter glass against the weatherstrip?
The front one to press the window glass against the weatherstrip?
What would happen if I cut them off?
My early stangs didn't have these. As you can see from the pictures, mine are rusty/shot.
It looks like they were plastic coated, as the remnants flaked off.
Anybody deal with a similar situation? I was thinking POR15, then coat with plastidip.
Any other suggestions.
Thanks
I suspect maybe the rear one is to hold the top of the quarter glass against the weatherstrip?
The front one to press the window glass against the weatherstrip?
What would happen if I cut them off?
My early stangs didn't have these. As you can see from the pictures, mine are rusty/shot.
It looks like they were plastic coated, as the remnants flaked off.
Anybody deal with a similar situation? I was thinking POR15, then coat with plastidip.
Any other suggestions.
Thanks