new here

[ramair]

I am new here, found this site from a link pasted on the 335 forum.

Currently I am working on a 73 Coupe, 302, C4 auto, AC, PS car. I have done quite a bit of work on it already but still have a lot left to do. I have replaced the passengers side outer wheel well, trunk floor drop off, quarter panel skin, tailight panel, and driver side floor pan. The body work is mostly done, I just need to tweak some spots on some panels, jam it out and paint it. As for mechanical work, I am going to change out the engine, trans, rearend and install power disc brakes. I am building a 85 roller 5.0 for it almost ready to be put together, I also have a rebuilt C4 out of a 70 Mustang. I have a 9" rearend and front Power disc brakes that are off 73 Cougar that will be going on this car.

 

[Steven Harris]

Hello Ramair,

Welcome. Glad to have you along for the ride.

 

[Mach1JB]

::welcome::

Please post some pictures , we love pictures

I am new here, found this site from a link pasted on the 335 forum.

Currently I am working on a 73 Coupe, 302, C4 auto, AC, PS car. I have done quite a bit of work on it already but still have a lot left to do. I have replaced the passengers side outer wheel well, trunk floor drop off, quarter panel skin, tailight panel, and driver side floor pan. The body work is mostly done, I just need to tweak some spots on some panels, jam it out and paint it. As for mechanical work, I am going to change out the engine, trans, rearend and install power disc brakes. I am building a 85 roller 5.0 for it almost ready to be put together, I also have a rebuilt C4 out of a 70 Mustang. I have a 9" rearend and front Power disc brakes that are off 73 Cougar that will be going on this car.

 

[RocketFoot]

Welcome to the forums! Great to have you aboard! Post some pics when you can!

::welcome::

 

[OLE PONY]

Welcome to the site from Virginia! Post up some pics of both cars if you can.

 

[whitesoc]

welcome to the forum

 

[sm3570]

Welcome! The more the merrier, I say. Pics?

 

[Nance]

Welcome!!

 

[ramair]

Thanks to everyone, its not pretty but I hope to have it up and going with some fresh paint too boot. Here are a couple of pictures one is before I started any work on it and one of what it looked like a few months ago.


Here are some pictures of the latest work I done on my car. I had some rust in the floor pans and had to replace the drivers side floor and make a patch for the passengers side rear seat platform. On top of the rot through I had lots of surface rust and almost 40 years of nastys to clean up off the floors.

 

[don29163]

Welcome to the site ! I love that 66 Comet in the pics.

 

[Tnfastbk]

::welcome:: Glad you found us.

 

[sm3570]

Welcome to the site!

 

[luxstang]

Hi and Welcome to the site!

::welcome::

Welcome to the site ! I love that 66 Comet in the pics.

+! Me too!

 

[droptop73]

Welcome to the site.

X3 on the Comet.

 

[ramair]

My Comet is my baby, the 73 Mustang is my stress relief and long term project. My 66 Comet 202 started out life as a 200 inline six car with a automatic. I put in a 289 and a BW T10 four speed tranny and ran that for about 10 years. Last year I pulled the 289 and sold it and bought a 69 351W out of a F100 and a toploader out of a 66 Fairlane for my Comet. I also have a 9" rearend out of a 70 Mustang and some 78 Granada disc brakes I plan to install on this car.

 

[73vertproject]

Welcome to the club, RamAir! Glad to have you aboard. Looking forward to seeing progress on your project.

Doc

 

[davechesnut]

welcome and greetings from aurora! nice group of cars you have!!

 

[not2old]

Welcome... Looks the you some work ahead of you and alot to share.

Alan L

 

[Don65Stang]

Welcome to the site!