The front bumper on my 72 is kinda chewed up. I was wondering what to use to fill in gouges and imperfections? urethane front bumper.
urethane front bumper
- Thread starter woodstang
- Start date
Help Support 7173Mustangs.com:
- Joined
- May 19, 2021
- Messages
- 1,367
- Reaction score
- 958
- Location
- Fort Mohave, AZ & So Cal (Upland)
- My Car
- 73 Grande will undergo three phase build process. Phase 1 is complete (driver). Phase 2 is interior/exterior restoration. Phase 3 is ++ performance.
- Joined
- Jul 5, 2013
- Messages
- 1,109
- Reaction score
- 624
- Location
- Jonesborough, TN
- My Car
- 1973 Mustang Mach 1
Hey Woodstang,
The Rickster is a 73 Mach 1, but it had a wicked tear in the front bumper, and although it's a bit different from your 72 bumper, some of the techniques I used to repair it may work for you. The bumper repair is on page 9 of the build thread. Yes, I also referred to the motortrend article and tutorial that Steve mentioned above to figure out how to do the repair. I hope this helps.
https://7173mustangs.com/threads/the-rickster-a-73-mach-1-work-in-progress.16772/page-9#post-402822
The Rickster is a 73 Mach 1, but it had a wicked tear in the front bumper, and although it's a bit different from your 72 bumper, some of the techniques I used to repair it may work for you. The bumper repair is on page 9 of the build thread. Yes, I also referred to the motortrend article and tutorial that Steve mentioned above to figure out how to do the repair. I hope this helps.
https://7173mustangs.com/threads/the-rickster-a-73-mach-1-work-in-progress.16772/page-9#post-402822
Similar threads
