Do you just need the vent, I also have the vapor canister for the engine bay?
Fuel filler pipe gasket replacement
- Thread starter GrantOv
- Start date
Help Support 7173Mustangs.com:
- Joined
- Jul 3, 2015
- Messages
- 703
- Reaction score
- 208
- Location
- Opelika, Alabama
- My Car
- 1972 Mustang Coupe 302 - 2V, one owner
GERMYS_72: I have a Ford OEM Fuel Tank Strap and a Ford OEM Gas Tank Metal Locking Ring with a O-Ring if needed?
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
I just need the tank vent, the engine bay canisters and fuel lines are all there.
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
Thanks Bill, I'll check and let you know if I need to grab that Oring. I do still have the OEM straps
- Joined
- Jul 12, 2010
- Messages
- 5,486
- Reaction score
- 3,792
- Location
- Killingworth, CT
- My Car
- 71 Mach 1
71 XR-7 hardtop
71 Country Squire
65 hardtop
72 Country Sedan
69 XL sportsroof
Check the fit of your taillights against the new panel. There have been a couple reports of brackets welded in the wrong location. If not discovered until after the car is painted, makes for a PITA to fix.
I can send the vent with a new o-ring and metal lock ring I received extra with the new fuel tank. I throw those in for free. Don't see me needing them any time soon.
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
Awesome. Two less things I have to buy from NPD
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
Cool. I'll check the lights against the panel, and if the bolt holes line up, I will use this one. I think it's from CJ Pony parts.
I had heard more recent tail panel versions are better, but this is probably fine.
It is highly recommended to check the fit of your tail lights to the panel before you weld it in place. The panel I bought had the mounting tabs improperly located on one side and I had to move them. I didn't discover this until it was welded in place. It would have been much much easier to do on a workbench.
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
Who sells a tried and true tail panel I don't have to worry about ?
The one I mentioned came from CJ Pony. I just looked and they don't list who makes it for them. The fit was good, other than those tabs, but had I checked them right after receiving (often not the case with me) I would have asked for a replacement.
I have Sherman panels for a ranchero that look to be good quality. I understand Dynacorn to be good, but don't really know. Someone else with more experience will likely be able to give better feedback than I have to offer.
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
This tail panel is *****. Even after modifying it, the light fitment is not good, and is nothing like factory fitment of the lights in the old panel. Two of the fastener holes do not line up well either, like everyone said might happen.
This panel is going in the scrap pile, Back to the drawing board
- Joined
- Sep 12, 2015
- Messages
- 8,063
- Reaction score
- 3,167
- Location
- SW Ontario
- My Car
- 1971 Mustang Mach 1, M code, 4 speed.
On my car, the only panel that is not original is the taillight panel. The original had rust pin holes starting so when it was repainted, I chose to replace it. I just missed out on an NOS one, so had to buy a repop. The one I got was from NPD. The material thickness was good and no issues with fitment. I don't know the manufacturer, but I don't think it was Scott Drake. I avoid SD whenever I can, mostly garbage imo.
https://www.npdlink.com/product/pan...2Bpanel&top_parent=200001&year=1971&year=1971
Hmm, this is the better one of the two listed. READ the spec and reviews on both. Check other parts suppliers as well, CJ, Summit etc.
Last edited:
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
I'm tempted to cut out the center section of this not-so-great panel and weld it to the tailight sections that are still on the car. The previous owner did a fairly nice job on the vertical cuts.
I know that's ghetto, but it's doable.
- Joined
- Mar 15, 2024
- Messages
- 280
- Reaction score
- 130
- Location
- Austin
- My Car
- 72 Mach 1 H code
72 Sportsroof 351W
I pulled the trigger on this NOS used one. $300 shipped, and it just needs some light cleanup
