Jparmenter
Member
Is there a replacement for the Fuel Vapor Canister? I can't seem to find one anywhere. I was thinking about restoring mine but if I can get a new one, I might do that.
1973 Mustang Mach 1 Fuel Vapor Canister
- Thread starter Jparmenter
- Start date
Help Support 7173Mustangs.com:
- Joined
- May 19, 2024
- Messages
- 67
- Reaction score
- 22
- Location
- Fanny Bay ,Vancouver Island
- My Car
- 1973 Convertable ,351 cobrajet,Q code,4 speed Hurst..I've owned her since 1984
If you find one find two, I dont have one either and very limited scrapes to look at.
- Joined
- Apr 3, 2011
- Messages
- 675
- Reaction score
- 245
- Location
- United States
- My Car
- 1973 Q code Mach 1 blue glow C6 auto
1973 Q code Mach 1 blue glow, 4 speed
1973 H code Convertible ivy glow, FMX
Try West Coast Cougar. They have one for about $60. It’s a used part so you’d have to spruce it up a bit. Also there is one on Ebay right now for $45. I just restored mine including opening it up and replacing all of the 50 year old charcoal with new. Not a hard project at all.
Jparmenter
Member
Thank you so much. Yeah, it didn't look to difficult. This may be one of my winter projects.
- Joined
- Apr 3, 2011
- Messages
- 675
- Reaction score
- 245
- Location
- United States
- My Car
- 1973 Q code Mach 1 blue glow C6 auto
1973 Q code Mach 1 blue glow, 4 speed
1973 H code Convertible ivy glow, FMX
The hardest part is getting it opened up. I got replacement charcoal from a fish tank supply store. Here are some photos of mine opened up. I found that the foam on the inside lid had been smashed at the factory making the whole fuel vapor recovery process much less efficient. I was able to straighten that foam piece out again for accurate installation.
Attachments
detritusmaximus
Well-known member
- Joined
- Sep 21, 2013
- Messages
- 1,332
- Reaction score
- 680
- Location
- US
- My Car
- 1973 Grande #1 looong time ago
1970 Sportsroof #2 almost as long
1971 Sportsroof M-code #3 needs money
2008 GT #4 where the money went
Something like the one in this pic?....it's dirty, but has the bracket/clamp with it.
Jparmenter
Member
May I ask how you got it open?
- Joined
- Apr 3, 2011
- Messages
- 675
- Reaction score
- 245
- Location
- United States
- My Car
- 1973 Q code Mach 1 blue glow C6 auto
1973 Q code Mach 1 blue glow, 4 speed
1973 H code Convertible ivy glow, FMX
The top edge of the lid is rolled down over the body of the canister. I used a long thin blade common screw driver and a small hammer to slowly bend the rolled edge up and out of the way one small section at a time. It’s a time consuming process that requires a lot of patience. My goal was not to damage the rim so I could get it back together without having it appear all hacked up.
I have one I could sell for $45 plus shipping, if interested send me a DM. Just removed it from my 72 as I don't need it anymore.
Jparmenter
Member
I will give it a shot. Thank you!
Bobby
Well-known member
I second the suggestion to recharge your canister. Use a small thin flat blade screwdriver, wedge it in the start at the beginning of the crimp and pry it up. You can continue to use the screwdriver or a pair of needle nose piers and continue to lift the crimp. Charge it with activated charcoal and recrimp the lid using a pair of pliers and paint if desired.
Last edited:
- Joined
- May 19, 2024
- Messages
- 67
- Reaction score
- 22
- Location
- Fanny Bay ,Vancouver Island
- My Car
- 1973 Convertable ,351 cobrajet,Q code,4 speed Hurst..I've owned her since 1984
Thankyou. just wanted to check the size difference
- Joined
- Apr 3, 2011
- Messages
- 675
- Reaction score
- 245
- Location
- United States
- My Car
- 1973 Q code Mach 1 blue glow C6 auto
1973 Q code Mach 1 blue glow, 4 speed
1973 H code Convertible ivy glow, FMX
Not sure about other years but all three of my 1973 Mustangs have the tall canister. I’ve seen some that are shorter but not on a 73.
- Joined
- May 19, 2024
- Messages
- 67
- Reaction score
- 22
- Location
- Fanny Bay ,Vancouver Island
- My Car
- 1973 Convertable ,351 cobrajet,Q code,4 speed Hurst..I've owned her since 1984
Havent figured out the PM part of the forum, But Im close enough to drive to Tacoma. Have cousins in Seattle. email me at [email protected].
- Joined
- May 19, 2024
- Messages
- 67
- Reaction score
- 22
- Location
- Fanny Bay ,Vancouver Island
- My Car
- 1973 Convertable ,351 cobrajet,Q code,4 speed Hurst..I've owned her since 1984
sometimes beggars can't be choosers.
- Joined
- Apr 24, 2020
- Messages
- 1,227
- Reaction score
- 1,288
- Location
- Pittsford, NY
- My Car
- My all time favorite vehicle is our 1969 Shelby GT500
The 1973 canisters were definitely taller, apparently to provide more vapor storage capacity. I am pretty sure the diameter is the same as for 71-72 canisters.
detritusmaximus
Well-known member
- Joined
- Sep 21, 2013
- Messages
- 1,332
- Reaction score
- 680
- Location
- US
- My Car
- 1973 Grande #1 looong time ago
1970 Sportsroof #2 almost as long
1971 Sportsroof M-code #3 needs money
2008 GT #4 where the money went
Tap on a members name. Then select "Start Conversation". It's the same thing as a PM.
Similar threads
