Is the round plastic upper window stop available as a reproduction?

Flatback72. · Nov 28, 2024

I changed my window anti-rattle guide today in my left door, also found one of the round plastic window stops had fallen to pieces. There's only about a 1/4 of it left so I've turned it around so the last 1/4 is functioning correctly as a stop but it ain't gonna last long.

There is a couple of NOS items on ebay but priced accordingly.

Does anybody know if this part is reproduced?

rio1856 · Nov 28, 2024

Check with Mike at Motor city mustang. He's a vendor and supporter of the forum and and all around great guy. He has them on Ebay. You might want to contact him.

https://www.ebay.com/itm/1667546088...8OHqhj3R+IjiJ8W07mg64sujM=|tkp:Bk9SR6KmjqXuZA

giantpune · Nov 28, 2024

A previous owner reproduced one of mine with a hole saw through a piece of plywood.

Steve McMahan · Nov 28, 2024

Maybe one of our tech savvy members could 3D print some? I suspect most of ours are junk.

giantpune · Nov 28, 2024

Steve McMahan said:
Maybe one of our tech savvy members could 3D print some? I suspect most of ours are junk.

I have a printer. But would not bother trying to print one up.

My wife has all sorts of polymer, clay, and epoxy with a vacuum chamber. This part looks like something you could clone by casting and molding it. The epoxy is a million percent more durable and UV persistent than the sort of plastics you can 3D print on a home printer.

Doug's 73 Mach1 · Nov 28, 2024

I have several original ones in good condition if that may be of interest to you.

Flatback72. · Nov 29, 2024

Thanks for the replies everyone, it seems these are not reproduced. I found a second hand one for sale from West Coast Classic Cougar for 11 bucks, so problem solved for the time being.

I don't think 3D printing these would provide a durable part. The original items seem to be made from plastic but I reckon machining pieces on a lathe from nylon bar stock would surely be a good hard wearing alternative (I'm a machinist by trade but now I'm retired I don't have access to a lathe anymore though....)

When the second hand stop arrives in the mail, before I install it I might measure it up and post the dimensions here in case it comes in handy for someone in the future who might like to turn some up out of nylon.

mrgmhale · Nov 30, 2024

Flatback72 said:
Thanks for the replies everyone, it seems these are not reproduced. I found a second hand one for sale from West Coast Classic Cougar for 11 bucks, so problem solved for the time being.

I don't think 3D printing these would provide a durable part. The original items seem to be made from plastic but I reckon machining pieces a lathe from nylon bar stock would surely be a good hard wearing alternative (I'm a machinist by trade but now I'm retired I don't have access to a lathe anymore though....)

When the second hand stop arrives in the mail, before I install it I might measure it up and post the dimensions here in case it comes in handy for someone in the future who might like to turn some up out of nylon.

I just came across your post. I needed to replace the door glass on both doors for our 73 Mach 1. I removed the inner door panel and found the various parts attached to the glass was using rivets instead of bolts and nuts like in 1970 - 1972, and pre 1969. I figured I would end up breaking one or more of the parts, so I purchased used plastic parts for the glass retention and regulator stops from WCCC also. I hope your parts are secured by bolt and nut, as it is far easier to unbolt those parts as opposed to drilling out the rivets. because I was going to replace the glass anyway I ended up using an air impact chisel to shatter the glass, where I only had to vacuum up the glass pieces. I bet hat was faster than drilling out all thise rivets. But, if you need to keep your glass that is not recommended <g>.

If you are interested to see what I did with the door glass replacement, with the attachment of the lastic pieces, you can go to some YouTube links below:

https://youtu.be/DXpAOKkxxZU
https://youtu.be/2B5zPGDBznU

Is the round plastic upper window stop available as a reproduction?

Help Support 7173Mustangs.com:

Flatback72.

Well-known member

rio1856

Drive it like you stole it!!!

giantpune

Well-known member

Steve McMahan

Well-known member

giantpune

Well-known member

Doug's 73 Mach1

Well-known member

Flatback72.

Well-known member

mrgmhale

Well-known member

Similar threads

Latest posts