kfairmont
Active member
SOLD!
Realized I had this my ad info in the wrong section. Here are the details and info.
Here are some pics on the CL ad. Links to videos can be found below.
car is located in Houston, TX
http://houston.craigslist.org/cto/4556145956.html
351 Cleveland Bored +0.030"
Oil restrictors installed in mains
Diamond Racing forged flat top pistons
Eagle H beam rods
4V closed chamber heads
Heads machined for studs and guide plates
Manley stainless intake and exhaust valves
Comp dual springs and retainers
Comp hardened pushrods
Comp roller rockers
Comp 292hr hydraulic roller cam and lifters
Hooker ceramic coated headers
Flow master mufflers with x-pipe and cutouts
Weiand intake
Holley 750dp
MSD pro billet Distributer
MSD 6AL ignition box with adjustable rev limiter
4 speed top loader
Hurst shifter
new Ram clutch
Reserfaced Ram billet flywheel
Hi torque mini starter
Ford 9" rear end
3.20 gear
Locker rear end
31 spline axles
Tinman subframe connectors
Willwood brakes 6 piston calipers front with 4 piston calipers rear
Late model master cylinder
Willwood proportioning valve
Interior in excellent shape with no tears
Dash pad in excellent condition
Heat and sound deadening barrier under carpet
Defrost only no heat or air conditioning
Kenwood CD/Bluetooth Audio with 6 speakers and 10" sub.
Two amplifiers Alpine 75w x 4 channel and Total Audio 360w for sub.
Boss Motorsport Wheels
20 X 10 back with 275 35r 20
20 X 8.5front with 275 30r 20
The underside of the car was completely restored and painted.
It's an older paint job with some nicks and scratches. Good "10 footer" Not perfect but looks good and still shines.
Recently updated the grill and just had front bumper painted to match car color.
Here are a couple walk around videos:.
Please contact me with any additional questions
Realized I had this my ad info in the wrong section. Here are the details and info.
Here are some pics on the CL ad. Links to videos can be found below.
car is located in Houston, TX
http://houston.craigslist.org/cto/4556145956.html
351 Cleveland Bored +0.030"
Oil restrictors installed in mains
Diamond Racing forged flat top pistons
Eagle H beam rods
4V closed chamber heads
Heads machined for studs and guide plates
Manley stainless intake and exhaust valves
Comp dual springs and retainers
Comp hardened pushrods
Comp roller rockers
Comp 292hr hydraulic roller cam and lifters
Hooker ceramic coated headers
Flow master mufflers with x-pipe and cutouts
Weiand intake
Holley 750dp
MSD pro billet Distributer
MSD 6AL ignition box with adjustable rev limiter
4 speed top loader
Hurst shifter
new Ram clutch
Reserfaced Ram billet flywheel
Hi torque mini starter
Ford 9" rear end
3.20 gear
Locker rear end
31 spline axles
Tinman subframe connectors
Willwood brakes 6 piston calipers front with 4 piston calipers rear
Late model master cylinder
Willwood proportioning valve
Interior in excellent shape with no tears
Dash pad in excellent condition
Heat and sound deadening barrier under carpet
Defrost only no heat or air conditioning
Kenwood CD/Bluetooth Audio with 6 speakers and 10" sub.
Two amplifiers Alpine 75w x 4 channel and Total Audio 360w for sub.
Boss Motorsport Wheels
20 X 10 back with 275 35r 20
20 X 8.5front with 275 30r 20
The underside of the car was completely restored and painted.
It's an older paint job with some nicks and scratches. Good "10 footer" Not perfect but looks good and still shines.
Recently updated the grill and just had front bumper painted to match car color.
Here are a couple walk around videos:.
Please contact me with any additional questions
Last edited by a moderator:
