351 cleveland heads

[73 SGM Mach]

Can anyone look at these pictures and tell if these are 4v or 2v heads? I think they are closed chamber and they have some date codes. I have requested additional pictures of the codes under the intake ports. Seller wants $1200 for the pair is that a good price? Thanks for the help!
Jeff

 

[Sheriff41]

They are D0AE-N 4V closed chamber heads. I would consider $1,200 on the high side for heads that need machine shop servicing. Have these been checked for cracks? Have the original valves been replaced? Guides and seats? Lots to consider before shelling out the asking price, from my point of view.

 

[Hemikiller]

$1200 is a lot for a set of heads that needs a pile of money in parts and machine work. At that price point, aluminum heads make more sense.

 

[Cleveland Crush]

Agree with Sheriff & HK...proceed with caution on those heads. They do appear to have highly
undesirable multi-groove factory valves.

 

[Stanglover]

I had a set of similar heads I bought for $500 Cdn. or about 450 US at the time. I also bought a set of bare GA heads that were crack checked for 200 Cdn.
If they're selling for 1200 now, damn I wish I'd kept em!
The guy's a dreamer!

 

[tony-muscle]

I agree with the above. I have seen similar heads in the Facebook 713 group going for $400-$500.

 

[73pony]

Very high price. There is a guy local to me selling a set of fresh built 4v closed chamber heads for $600.

 

[73 SGM Mach]

Thanks all for the input! I dont know with todays markets if that was resonable or not. NOT!

 

[Ryunker]

Thanks all for the input! I dont know with todays markets if that was resonable or not. NOT!

To me that is 100% insane. These are desirable to a very small market in the scope of all vintage cars. A pair of heads that still need to be gone thru is about $400 a pair, the machine shops generically expect $500 a head to get ready for use aside from parts that may be needed. Years ago I purchased a bare block and a set of those same heads complete were just thrown in as a gift.

 

[Zach]

1200 + machine work and assembly is a little steep, at what price do you just opt for some aluminum heads. Was in a similar situation so I went with 3v chis and ended up putting double the original cash down the drain

 

[73 SGM Mach]

1200 + machine work and assembly is a little steep, at what price do you just opt for some aluminum heads. Was in a similar situation so I went with 3v chis and ended up putting double the original cash down the drain

3v CHI heads no good?

 

[ib4stangs]

This $700 set will be at Fall Carlisle, Oct 2...

https://harrisburg.craigslist.org/pts/d/carlisle-351c-4v-closed-chamber-hi-po/7781982642.html

 

[73 SGM Mach]

1200 + machine work and assembly is a little steep, at what price do you just opt for some aluminum heads. Was in a similar situation so I went with 3v chis and ended up putting double the original cash

This $700 set will be at Fall Carlisle, Oct 2...

https://harrisburg.craigslist.org/pts/d/carlisle-351c-4v-closed-chamber-hi-po/7781982642.html

Thank you but I wont be there and I would be stuck at close to the same price for shipping.