- Joined
- Feb 20, 2020
- Messages
- 1,090
- Reaction score
- 337
- Location
- North Georgia
- My Car
- 1972 Mach 1 dark green
after trying to find a shop to do some work on my '72 finally dropped her off at one today. When I first got it 2 years ago I brought it to a local shop for some work. Replacing the battery apron which had rusted thru and some brake work. Before I brought it there I damaged the hood with some sandpaper so they said they would paint 1/2 the hood. They did so but also just painted right over 3 chips 6 inches from where I did my damage, not even trying to sand those chips down. Strike 1 for that shop. Next a few months later I wanted to replace all the glass, did all the side glass myself but had a hard time finding a shop to do front and back. Finally found "Rusty Classic Restorations" who would do it. Dropped it off with front and back glass and a full bag of new clips. When I picked it up they said "we could not get the top back window SS trim to seat". Looking at it I said "it is because you did not put 2 clips in'. How could a shop return something not completed I will never understand? But I picked it up, strike 2. The best way to fix that would be to pull the glass and put in the clips however I just JB welded them in and the trim sits nice and even now.
Sooooooooooooo for the past 1 1/2 years I have been trying to find a shop to replace the front crossmember which is damaged and do more brake work, tune up a/c, etc. After interviewing a few shops I think I found one, hopefully the 3rd time will be a charm. https://sixescustom.com/
Sooooooooooooo for the past 1 1/2 years I have been trying to find a shop to replace the front crossmember which is damaged and do more brake work, tune up a/c, etc. After interviewing a few shops I think I found one, hopefully the 3rd time will be a charm. https://sixescustom.com/