71 coupe front valence

[andyro86]

Hi everyone,

First time posting. That’s for the help so far, really appreciated. I’m in the process of restoring my 1st car, 1971 mustang coupe 302. There’s a chrome body edge molding below the belt molding on the driver and passenger side doors. It extends to the front fenders. If someone could point me in the right direction it would be greatly appreciated. Thanks!!!

 

[MikeGriese]

A photo might help. Also, the front valence is the part that ties the front fenders together below the front bumper.

 

[andyro86]

A photo might help. Also, the front valence is the part that ties the front fenders together below the front bumper.

I have holes in center that look like
Brackets need to be added ?
I am new to this will try to send
A photo .

 

[MikeGriese]

The near holes are for lower bumper guards. The farther ones are for the lower grille support bracket.

 

[andyro86]

The near holes are for lower bumper guards. The farther ones are for the lower grille support bracket.

Thanks for the help .

 

[andyro86]

would anyone know where I can get the chrome body edge molding below the belt molding on the driver and passenger side doors. It extends to the front fenders.

 

[Hemikiller]

I assume these are the moldings you're looking for? If so, those are the Protection Group rub strip moldings. They're not reproduced. You will have to get them used, or maybe NOS. @OMS or @Motorcity Mustang may have some

 

[Aus73Mach1]

I have holes in center that look like
Brackets need to be added ?
I am new to this will try to send
A photo .

I made up brackets to fit for strength as the spoiler screws to the valance. LH hole is also for the AC condenser bracket. This is on a 73.

 

[andyro86]

I made up brackets to fit for strength as the spoiler screws to the valance. LH hole is also for the AC condenser bracket. This is on a 73.

View attachment 70657

Thanks for the help and the pic

 

[Bill Perkins]

Welcome Abroad Opelika, Alabama