71 Mach 1 Drive Shaft

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mach 1 marc

Well-known member
Joined
Apr 1, 2013
Messages
158
Reaction score
0
Location
South florida Native
My Car
71 mach 1 lincoln 460,72 Grande 351 cleveland
We put stock spring shackles and Leafs Back on our 71 Mach 1 after removing old worn out leafs and spring shackles that were Home made out of iron with adjustable holes they were 3 inches longer than stock shackles .We went to put the driveshaft back in after the new leafs and shackles were installed and it is now to Long. Any one know the length the driveshaft should be for a 71 mach 1 with a 460 lincoln and a c-6 transmission

 
Is the C6 from a Lincoln as well? They use a longer tailshaft than a standard Ford passenger car C6. Best to measure what you have.
Thank You for the reply.............



www.429megasite.com
thanks...........



+1..Got to measure it..Then if too long.. take it over to a local auto machine shop and have it cutt down...Wont cost much..They will balance it out and everything.
Its at mickys drivetrain now .. Thanks for the info.... I just need to measure correctly.. Thanks for the reply

 
Last edited by a moderator:
Back
Top