Silver5oh
Member
- Joined
- Dec 9, 2017
- Messages
- 5
- Reaction score
- 0
- Location
- Claremore, OK
- My Car
- Just getting started on resto-modding my 3rd '73 Mustang. It's an h-code Mach1 thats getting a mild 351 Cleveland and a Tremec 5-spd, 3:50 T-Lok and 4-wheel disks.
[url=https://ibb.co/eNgx0G][img]https://preview.ibb.co/jj2gSw/IMG_6169.jpg[/img][/url]
Hey all, I recently picked up a 71 Mach1 from an older gentleman who was selling off a handful of cars to clear the property he sold. It was one of the few cars inside but it still has some rust issues.
It’s a roller (no motor or trans) but it was a factory M code / auto trans car, 4-wheel manual drums, AC, PS, deluxe interior, non-fold down seat.
New floor pans were started to be installed; passenger side is tacked in but needs finished, drivers side is just laying on top of original floor. Also comes with a new trunk pan. Unibody of the car is still very solid along with rocker panels, doors etc, trunk lid needs work/replaced
I have about 40 pics and can email/message them upon request.
This is not a pristine find, it needs a full restoration but would be worth saving.
Located in Claremore, OK (near Tulsa) and asking $4500 OBO ** REDUCED to $4000 OBO Only selling as I've found something else I'd rather have
Best way to contact me with my work hours would be by text @ 918-527-5544
Look at pics and see if it’s something you’d be interested in taking on
It’s a roller (no motor or trans) but it was a factory M code / auto trans car, 4-wheel manual drums, AC, PS, deluxe interior, non-fold down seat.
New floor pans were started to be installed; passenger side is tacked in but needs finished, drivers side is just laying on top of original floor. Also comes with a new trunk pan. Unibody of the car is still very solid along with rocker panels, doors etc, trunk lid needs work/replaced
I have about 40 pics and can email/message them upon request.
This is not a pristine find, it needs a full restoration but would be worth saving.
Located in Claremore, OK (near Tulsa) and asking $4500 OBO ** REDUCED to $4000 OBO Only selling as I've found something else I'd rather have
Best way to contact me with my work hours would be by text @ 918-527-5544
Look at pics and see if it’s something you’d be interested in taking on
Attachments
-
2D79C9C7-A4D6-4CD3-9230-D40DDC6609FD.jpeg509.2 KB
-
02D3FCDD-9DE7-453C-BFD8-9F9E1C19A2E5.jpeg414.5 KB
-
15D7BF4A-E5E8-489A-9E67-4DC5F9D61CE2.jpeg462.4 KB
-
FA3C094D-87A3-4124-AEDB-E1B43376DF5B.jpeg441.8 KB
-
53AEB988-1648-4AB4-869E-4BC0ABEDB1AA.jpeg343 KB
-
14B67F1B-A121-4E90-8270-EC3C4D4D55AC.jpeg318.8 KB
-
5C6BA3A5-FCA1-4CB4-978B-46155D94939C.jpeg220.5 KB
-
B3BD8F8E-454F-4D12-A9A7-BCDBF46354E0.jpeg405.5 KB
-
DD2E7F5E-EAB2-4DE2-AC22-BA1428F436B2.jpeg418.7 KB
-
20BBC461-361E-45E6-BB67-DC1CBE58E339.jpeg243.2 KB
Last edited: