Blinker info

[70cobrascj]

I had asked some time ago a question regarding my front blinkers.
The problem was or seemed they didn’t work with the headlights on. They kind of look like they were slightly dimming but nothing noticeable. They appeared to work just fine with the headlights off. The rear lights work with the headlights on and off.
So this has bugged me for some time now and I decided to take a look at the bulbs and check their function with and without the headlights on.
The bulbs are 1157’s with two elements and with the headlights off the blinker is using the thinner less bright element. And with the lights on the thicker brighter element is light up over powering the thinner dimmer element. To me this seems back wards but I’m not sure what is right and what is wrong.
They are aftermarket marker/blinker housings. So maybe the wiring is wrong and is backwards.
Anyone else running aftermarket front blinkers and have noticed this?
Thanks
View attachment IMG_4181.mov

 

[midlife]

Remove the bulbs, rotate 180*, and re-insert.

 

[70cobrascj]

You can’t the socket had off set pins that are different depths in like a 94 bulb that had even depth pins.
Could cut and slice wires and switch them maybe

 

[70cobrascj]

Problem solved cut and swapped the black and brown wires, for some reason they used the blue wire for the ground
My way to clean plug sockets.
View attachment IMG_4206.mov