hendrixftw22
New member
- Joined
- Sep 29, 2024
- Messages
- 2
- Reaction score
- 0
- Location
- Lexington KY
- My Car
- 71 Mach 1, 302, 3 Speed
Hi! I am trying to install the brake booster on my 71 Mach 1 factory manual drum brakes. We have completed the disc brake conversion on the front and now are ready to install the brake booster. We have removed the master cylinder that was originally on it and now see that there are the two holes the master cylinder was threaded into and then two studs below. I have read in some other forums that we might need to drill these studs out. However, our kit instructions say to drill out 4 new holes for the brake booster to be installed. Is this correct?
If so, do we need to remove the bracket holding the pedal that is there now? Any feedback/guidance would be appreciated!
If so, do we need to remove the bracket holding the pedal that is there now? Any feedback/guidance would be appreciated!
