For those interested...in workarounds for dash bulb holders
I have been trying to find a replacement center tri gauge light bulb holder (which I understand are not re-produced...at least I haven’t found any).
They are 5/8” and with brittle 50 year old plastic...parts of mine were broken, so the bulb holder wouldn’t stay securely in the bezel housing. They are the same bulb holders as those used in the center console lower clock lights, as well.
I found a workable solution as follows (not a 100% exact fit but works great with a small amount of Dremel work). I was ordering some led bulbs from HiPo and though I would order some to give it a try.
HiPo Parts Garage: part #: T10-PTS-R (rubber). Bulb socket w/ pigtail wire leads
They use the same 194 type (T10 wedge) bulb as the original. Not concourse but workable and hidden behind the dash, in any event.
They come from HiPo with 4 knobs of which 2 needed to be ground down slightly to fit into the bezel.
picture 1: left is as ordered, right one has had 2 knobs dremelled off
picture 2: inserted into back of tri gauge cluster
hope this helps someone along the way...


I have been trying to find a replacement center tri gauge light bulb holder (which I understand are not re-produced...at least I haven’t found any).
They are 5/8” and with brittle 50 year old plastic...parts of mine were broken, so the bulb holder wouldn’t stay securely in the bezel housing. They are the same bulb holders as those used in the center console lower clock lights, as well.
I found a workable solution as follows (not a 100% exact fit but works great with a small amount of Dremel work). I was ordering some led bulbs from HiPo and though I would order some to give it a try.
HiPo Parts Garage: part #: T10-PTS-R (rubber). Bulb socket w/ pigtail wire leads
They use the same 194 type (T10 wedge) bulb as the original. Not concourse but workable and hidden behind the dash, in any event.
They come from HiPo with 4 knobs of which 2 needed to be ground down slightly to fit into the bezel.
picture 1: left is as ordered, right one has had 2 knobs dremelled off
picture 2: inserted into back of tri gauge cluster
hope this helps someone along the way...

