Door wiring boots

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I was able to find a nice set of conduits on eBay and dilled out the door and pillar for them. There are dimples in the sheet metal where you need to drill. I used a caliper to measure the outer diameter of the boot at each end to determine the size hole I needed to drill into each. They vary in size slightly from the pillar to the door. I had the luxury of the doors being off of the car when I did it, though.
 

Attachments

  • Mach 1 (335).jpg
    Mach 1 (335).jpg
    221.3 KB
  • Mach 1 (337).jpg
    Mach 1 (337).jpg
    234.9 KB
That LMC part is a good find, Don. Thanks for sharing that one.
 
Back
Top