Door wiring boots

[CalgaryChris]

Added power locks and needing a solution for the rubber boots between door and interior. Thanks

 

[tpj71mach]

I was able to find a nice set of conduits on eBay and dilled out the door and pillar for them. There are dimples in the sheet metal where you need to drill. I used a caliper to measure the outer diameter of the boot at each end to determine the size hole I needed to drill into each. They vary in size slightly from the pillar to the door. I had the luxury of the doors being off of the car when I did it, though.

 

[Don C]

You might try what this fellow member came up with:
https://7173mustangs.com/threads/austin-vert-finds-good-door-rubber-bellows.25681/#comment-262945

Then, there's these:
https://www.cjponyparts.com/detroit-speed-door-jamb-wiring-boot-kit/p/DJBK-V/

And then there's these from LMC Truck, probably the best deal I found, part #47-1025, door conduit, $8.95 each
https://www.lmctruck.com/body-components/exterior-rubber/fd-1980-96-exterior-rubber-components

 

[Sheriff41]

You might try what this fellow member came up with:
https://7173mustangs.com/threads/austin-vert-finds-good-door-rubber-bellows.25681/#comment-262945

Then, there's these:
https://www.cjponyparts.com/detroit-speed-door-jamb-wiring-boot-kit/p/DJBK-V/

And then there's these from LMC Truck, probably the best deal I found, part #47-1025, door conduit, $8.95 each
https://www.lmctruck.com/body-components/exterior-rubber/fd-1980-96-exterior-rubber-components

That LMC part is a good find, Don. Thanks for sharing that one.

 

[CalgaryChris]

Thanks. Top notch search skills Don as usual.