- Joined
- Aug 17, 2019
- Messages
- 379
- Reaction score
- 245
- Location
- Fort McMurray, Alberta
- My Car
- '73 Vert with 4R70W
351C Ram Air 2V 441 hp @ 6000 RPM
SEFI EEC-V (2004)
9" trac-loc limited slip 3.5:1
P-Zero 265/35ZR-19's front 305/30ZR-19's rear
Finally got some paint in the engine bay. The rust wasn't too bad but I had to strip a lot of paint and sealer to find it. Went with the Por15 system. Degreaser, rust remover and pre-primer then black primer. I don't have a paint booth so it all went on with brush and roller. The primer is so thick and has such a long dry time, I was able to go back on each side to fix runs when painting around bolt holes from the opposite side.
