1 1hotboss Well-known member Joined Jun 12, 2015 Messages 55 Reaction score 1 Location Canada My Car 1970 Boss 302 Jun 13, 2015 #2 which after market flywheel would you suggest for a Boss 351. Thanks
4 4mm Well-known member Joined Aug 26, 2012 Messages 447 Reaction score 3 Location S. TX My Car 1971 Mustang 351C 4V Fastback Jun 22, 2015 #3 If you have an aftermarket damper I would use Centerforce. That's what I run on my B1. I have also used Hayes in the past.
If you have an aftermarket damper I would use Centerforce. That's what I run on my B1. I have also used Hayes in the past.
J Jeff73Mach1 Well-known member 7173 Mustang Supporter Member Joined Apr 27, 2012 Messages 4,765 Reaction score 104 Location Nashville, Tennessee My Car 1973 Q code Mach 1 Jun 23, 2015 #4 I'm running a Centerforce on my engine. It is a nice part. I found it zero balanced and on Craigslist for a hundred bucks-which was perfect since I went with an internally balanced engine on my build and used a ATI dampner (Also a very nice part)
I'm running a Centerforce on my engine. It is a nice part. I found it zero balanced and on Craigslist for a hundred bucks-which was perfect since I went with an internally balanced engine on my build and used a ATI dampner (Also a very nice part)
