FRONT STRUCTURE MACH UP

[Qcode351mach]

Really Cruising...I can smell some burnt rubber coming my way !

 

[Nance]

Lots of work looking good..

 

[RocketFoot]

Nice! What are you planning for front suspension?

 

[coilwire]

Looking good.::goodjob::

Jim

 

[Qcode351mach]

Nice! What are you planning for front suspension?

B--I'm going with this

http://www.streetortrack.com/files/images/st/Coilover_Front_Suspension.pdf

I'm planning on buying it very shortly, after the front on this side is done I will do the floor then it's ready to come off the dolly so I need the susp installed & fitted...I also want to have the car on all fours to fit all the sheet metal.

 

[RocketFoot]

That looks cool! We are probably going to get a Super Suspension Kit from Laurel Mustang. We were going to get a complete Mustang II coil over set but Don at Ohio Mustang hooked us up with the replacement shock towers and stuff we need to use the stock stuff...(MII kit would eliminate the shock towers)

 

[BigPinoyHunk]

Nice! What are you planning for front suspension?

B--I'm going with this

http://www.streetortrack.com/files/images/st/Coilover_Front_Suspension.pdf

I'm planning on buying it very shortly, after the front on this side is done I will do the floor then it's ready to come off the dolly so I need the susp installed & fitted...I also want to have the car on all fours to fit all the sheet metal.

right on, i'm doing the same suspension after the tax returns comes.

 

[Qcode351mach]

That looks cool! We are probably going to get a Super Suspension Kit from Laurel Mustang. We were going to get a complete Mustang II coil over set but Don at Ohio Mustang hooked us up with the replacement shock towers and stuff we need to use the stock stuff...(MII kit would eliminate the shock towers)

I looked at the MII stuff & every other type of susp out there...I have researched long & hard ! I didn't get that warm & fuzzy feeling looking at the MII stuff..even though it would have saved me a bunch of work ! I'd like to see a real world install in a 71-73 & feedback after a bunch of miles on it. I'm into handling & corner carving but still want to be able to have a smooth ride for those long hauls..I think the sot system fits the bill perfect..I was going to do a tri 4 link in the rear but have decided to go with these instead

http://www.totalcontrolproducts.com/download/datasheets/RLSS_DS_WEB.pdf

Going with the 1" drop..their sway bar setup BUT with the matched bilstens for the rear shocks...& I have narrowed the wheels down to these 2

http://www.cruizinconceptswholesale.com/foose-legend-wheels.asp

http://www.drivelinecustoms.com/wheels.aspx?ID=627&year=1972&make=Ford&vehicle=Mustang%20Mach%20I&subclass=18&syn=Wheels&style=&size=&finish=&bolt_pattern=&brand=

I can't wait!!!!!

 

[mach71351c]

Moving along.