Frostburg MD

[dsrush52]

Hi all, this is my first post, but I am starting on the interior.

I used Shaffer Restoration for the exterior, and Jeff did an amazing job.

72 Coupe, 302 VIN F with an aftermarket edelbrock 4barrel intake and carb. (not happy with carb)

Everything is standard, however I changed my top and interior to black, the original was ginger.

As far as I know, its the original engine. Currently trying to decide how far into the A/C I want to go, blower motor works, but vacuum is leaking somewhere and its stuck in Defrost.

 

[mjseakan]

Welcome from Central New York.
I've got an Edelbrock 1406 4bbl carb and have no issues with it.
Mike

BTW got pictures?

 

[Sheriff41]

Howdy and welcome from Texas (by way of Valencia, Spain currently)! You've got our attention, so pictures are in order.

 

[James Bond]

Welcome from NW Oregon.

 

[Spike Morelli]

You're in the right place! Welcome aboard from Boise Idaho !

 

[will e]

Greetings from Phoenix! Post some pics!

 

[tpj71mach]

Welcome from Chicago! As the other guys said, we would love to see pics of your ride!

 

[Stanglover]

Welcome from SW Ontario Canada.

 

[nryans34express]

Welcome from NW Oregon.

Welcome

 

[73 Mach 1 4 me]

Welcome from Baltimore Maryland

 

[cv_72mustang]

Welcome from Center Valley , PA

 

[Steve McMahan]

Welcome from So Cal. On the vacuum issue, you’ve got to start at the vacuum source and using a vacuum pump (tester), check to see if the hose to the vacuum reserve and the reserve itself hold vacuum. Once you’ve done that, you can test the next leg, the hose from the reserve to the HVAC controls. Set the controls to off and see if that leg holds vacuum. You can use this, provided by another helpful member:

 

[bucketlist fastback]

Welcome here from Newark, Delaware. Lots of large body Mustang enthusiasts here with plenty of knowledge.

 

[Bill Perkins]

Welcome from Opelika, Alabama

 

[fuzzyflash]

Welcome from Auburn ,GA.

 

[Mustang_Charlie]

Welcome from upstate NY.
I was in Frostburg this spring to purchase a set of wheels.