BushwackerBob
Well-known member
- Joined
- Apr 25, 2016
- Messages
- 54
- Reaction score
- 22
- Location
- Colorado
- My Car
- 73 Mustang Mach 1, Q code.
Does anyone know how many Amps a stock yellow cap ignition coil pulls? The reason I'm asking I was going to try to make my 1973 Mach 1 more theft proof.
I found out my car would not start after pulling out the instrument cluster because I had disconnected the tachometer. I had to put a jumper in to start the car.
Here is my idea. I came across this GPS car tracking real time device on eBay. https://www.ebay.com/itm/112136195963 It's rated at 10A.
Instead of braking the connection to the fuel pump (no electric pump). I was going to use it to break one of the Tach wires. I'm not wanting to cut into the wiring harness so I thought I would a two wire pigtail https://www.ebay.com/itm/234010574697?hash=item367c1dff69:g:FRMAAOSwzi5gn5cR to do the splicing. I would cut and splice this pigtail to keep it as short as possible. I was going to hide this behind the tach on the inside of the firewall. This would give me the ability to track and locate the car and cut the ignition and be totally hidden.
In addition I also wanted to wire inline with the tracker a remote control relay that uses a key fob. https://www.ebay.com/itm/303871253344 so when I park and am away for a short time I can also disable the ignition without using the smart phone tracking app. It's also rated a 10A. This would also be mounded behind the instrument cluster on the inside firewall.
Any feedback would be appreciated.
BushwackerBob
I found out my car would not start after pulling out the instrument cluster because I had disconnected the tachometer. I had to put a jumper in to start the car.
Here is my idea. I came across this GPS car tracking real time device on eBay. https://www.ebay.com/itm/112136195963 It's rated at 10A.
Instead of braking the connection to the fuel pump (no electric pump). I was going to use it to break one of the Tach wires. I'm not wanting to cut into the wiring harness so I thought I would a two wire pigtail https://www.ebay.com/itm/234010574697?hash=item367c1dff69:g:FRMAAOSwzi5gn5cR to do the splicing. I would cut and splice this pigtail to keep it as short as possible. I was going to hide this behind the tach on the inside of the firewall. This would give me the ability to track and locate the car and cut the ignition and be totally hidden.
In addition I also wanted to wire inline with the tracker a remote control relay that uses a key fob. https://www.ebay.com/itm/303871253344 so when I park and am away for a short time I can also disable the ignition without using the smart phone tracking app. It's also rated a 10A. This would also be mounded behind the instrument cluster on the inside firewall.
Any feedback would be appreciated.
BushwackerBob