Woohoo123
Member
- Joined
- Mar 6, 2012
- Messages
- 5
- Reaction score
- 0
- Location
- NM
- My Car
- 1972 Mustang sports roof.
351 Cleveland with aussie heads
My having ignition problems on my 72. It won't turn over, and no spark from coil. I currently have msd 6al, along with msd blaster 2 coil, and mallory unilite distributor. I replaced the module in the unilite about a year ago. From what the guy at the shop told me was to get a new distributor, because the modules go out often. Anyway it ran for a while after I installed it, but within the last few months nothing. There is a youtube video on how to test the module. He says in the video, before testing the module, you have to test the coil. It should read 8-12v on the multi meter depending on how warm the resistor is. So, when test the coil is reads 1.54. When I disconnect the green wire from the neg side of the coil which leads to module, it reads 9.52. Hopefully someone has had the same issue. I'm trying to find out if the problem is the module again or maybe the msd 6al, or possibly something I may have over looked