oh dam
Well-known member
- Joined
- Apr 22, 2013
- Messages
- 147
- Reaction score
- 0
- Location
- Southern California, USA
- My Car
- 1972 Coupe
1994 GT Coupe
Hey guys! The name's Brandon and i have a 1972 Coupe. I have other cars as well, but for now we can discuss this one. The car was bought by my dad when i was 10 years old, i am now going to be 22. It was meant to be a father and son project and meant to be a built street car. However, life happened and things didn't go as planned. Instead, when i graduated high school, my dad began to restore it. He paid for the body work and engine, while i paid for the suspension, interior, and brakes. Instead of us working on it, we paid others to do it. Which wasnt wise, the body was poorly done the engine build came out way over budget, and the suspension was not what i expected. I was 18/19 at the time and didn't know much about cars as i thought, so lack of research into things costed money and in a sense, disappointment. Nonetheless, i took what i had and ran with it. I started getting into canyon carver, and into autocross, and into road racing. So i began pushing the car further away from what it was meant to do. And i will continue to push. This build thread is going to be updated as i go on. I started auto crossing with SCCA and i am building a 1994 GT. Maybe you guys have seen it in instagram. That car is getting most of the love unfortunately, because i am starting to get sponsors. BUT i will not forget about my first car, and when i begin to dump money into this car, it will be something to look out for. We also have a 1975 Datsun 280z and a 2007 GT/CS.
Build Album: https://www.flickr.com/photos/xdxpx/sets/72157664169567693
Photoshoot Album: https://www.flickr.com/photos/xdxpx/sets/72157654818206966
Build Page: https://www.instagram.com/madd_motorsports/
Personal Page: https://www.instagram.com/br.madrigal/
Drivetrain:
306 C.I.
Hyper eutectic Pistons
Chromoly Connecting rods & push rods
RHS 35012 Aluminum Heads w/custom valvetrain
Edbelbrock Ported AirGap Intake
Holley 750 carb
ARP bolts
Suspension/Chassis/brakes:
Maier Racing 600lb coils
Monroe Struts
Grab-a-Trac 1 1/8" Front Sway Bar
Garb-a-Trac Subframe Connectors
Addaco 3/4" Rear Sway Bar
Grab-a-Trac 200lb reverse eye leaf springs
Wilwood Forged Dynalite Front Drag Brake Kit
Corvette Master Cylinder and Hydroboost
Exterior:
Mach 1 Grille
Mach 1 Hood
Mach 1 front spoiler
Rev 100 18x8.5 20x9.5
Interior:
Striped interior w/custom door panels
Mahogany Steering Wheel
AfterMarket Tachometer, Oil pressure, Water temperature, Voltmeter
Corbeau Forza seats
Corbeau 3-Point Harness
Social media:
https://www.flickr.com/photos/xdxpx/albums
https://www.instagram.com/br.madrigal/
https://www.instagram.com/madd_motorsports/
https://www.youtube.com/watchv=nr9kTzW9o00&list=UUORIhzjYxKjWNcXPkOXMs2g
Build Album: https://www.flickr.com/photos/xdxpx/sets/72157664169567693
Photoshoot Album: https://www.flickr.com/photos/xdxpx/sets/72157654818206966
Build Page: https://www.instagram.com/madd_motorsports/
Personal Page: https://www.instagram.com/br.madrigal/
Drivetrain:
306 C.I.
Hyper eutectic Pistons
Chromoly Connecting rods & push rods
RHS 35012 Aluminum Heads w/custom valvetrain
Edbelbrock Ported AirGap Intake
Holley 750 carb
ARP bolts
Suspension/Chassis/brakes:
Maier Racing 600lb coils
Monroe Struts
Grab-a-Trac 1 1/8" Front Sway Bar
Garb-a-Trac Subframe Connectors
Addaco 3/4" Rear Sway Bar
Grab-a-Trac 200lb reverse eye leaf springs
Wilwood Forged Dynalite Front Drag Brake Kit
Corvette Master Cylinder and Hydroboost
Exterior:
Mach 1 Grille
Mach 1 Hood
Mach 1 front spoiler
Rev 100 18x8.5 20x9.5
Interior:
Striped interior w/custom door panels
Mahogany Steering Wheel
AfterMarket Tachometer, Oil pressure, Water temperature, Voltmeter
Corbeau Forza seats
Corbeau 3-Point Harness
Social media:
https://www.flickr.com/photos/xdxpx/albums
https://www.instagram.com/br.madrigal/
https://www.instagram.com/madd_motorsports/
https://www.youtube.com/watchv=nr9kTzW9o00&list=UUORIhzjYxKjWNcXPkOXMs2g
Last edited by a moderator: