Animal Lawyer
Well-known member
- Joined
- Sep 3, 2020
- Messages
- 279
- Reaction score
- 37
My '73 vert has a working rim blow steering wheel, however, at the bottom there is about 3-4" where there is no rim blow. As the rim blow works, I prefer not to spend $200 to fill in the small area, but, as this is where my fingers usually rest, I need to do something to fill it in. a piece of old rim blow switch should epoxy in rather seamlessly, I would think.
If anyone has a dead rim blow switch and would be willing to part with about 4" I would be grateful. The only alternative I can see is trying to build up a patch with a liquid rubber and trying to shape it,
I am open to other solutions, too
Rich
If anyone has a dead rim blow switch and would be willing to part with about 4" I would be grateful. The only alternative I can see is trying to build up a patch with a liquid rubber and trying to shape it,
I am open to other solutions, too
Rich