Minor upgrades and fixes…

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RIBS

Well-known member
Joined
Jun 9, 2021
Messages
734
Reaction score
918
Location
Metro Atlanta
My Car
1971 Sprint Tribute 302 C4 Convertible
I didn’t have all my dash lights, or a tach, now I have both!
Also lubed speedo cable, recentered dash, reworked dash pad fitment, adjusted kickdown, WOW what a difference! Added all the tach wiring, soldered jumpers on back of IP circuit board….first time ever having a gas gauge light!!!!
IMG_5220.jpeg

IMG_5218.jpegIMG_5204.jpegIMG_5203.jpegIMG_5202.jpeg
 
What was the wire soldered onto the printed circuit for? By the way, nice illumination! I should freshen up my instrument lighting as well.
 
What was the wire soldered onto the printed circuit for? By the way, nice illumination! I should freshen up my instrument lighting as well.
That’s where I had breaks in the pathways on the printed board, the soldered wire jumpers the breaks and completes the circuit. Without that half my lights didn’t work…
 
Back
Top