Mustang Mach 1 1973 351C V2 H-Code

[torbsim]

Thanks to the incredible support on the forum, I've made good progress on reinstalling the air conditioning system, which was uninstalled by the previous owner.

The compressor needs some attention, or I will replace it with a reconditioned model but original. The hoses are now fully installed. The reconditioned servo pump and associated hoses have also been installed.

The wiring harness on the engine is also new and pre-installed so far, the wiring harness for the alternator is still missing, which unfortunately has long delivery times.

The fan and the associated material have been installed.

I have polished over 300 screws and use the original ones for the most part. Where the previous owner used other screws, I use reproductions that I have purchased.

The carburettor now has the original sensor for the engine speed, which has also been installed.

The Motorcraft ignition cables and new spark plugs are also new. New Optima battery and new wiper water tank also installed.

The high-performance Bosch ignition coil naturally has the original black and yellow look.

The bonnet brackets were also returned to their original colour by the previous owner by spraying the engine compartment completely black, and I installed them today.

I also gave the "golden goose" its first stickers.

I'm happy with the results of the last 14 days so far.

Thanks again to everyone who has supported me so well with their knowledge here in the forum!

 

[torbsim]

Some more images