New Member in AZ, Joined to try and put together a Build plan for a 1973 Mach 1 that is in need of total restoration, trying to keep it simple cheap

[73 mach 1 1962]

For starters I found Out I have a Granada REar!

 

[Sheriff41]

Well, that's a mess!

Seriously, welcome to the forums and howdy from Texas! You'll find plenty of helpful advice and encouragement from the members here.

What do you mean by total restoration? Are you looking at taking it down to a bare shell and bringing it back for a concours level restoration, or are you thinking more of a mechanical and cosmetic restoration for a cruiser, cars and coffee car? If you cruise through the build threads in https://7173mustangs.com/discussion-forum/mustang-registry-project-build-threads.78/ you'll get some good ideas. You can ask questions of those that have been down that road before you. Check @tpj71mach for a recent build.

It looks like your 73 has the competition suspension, is it a Mach 1? Tell us more about your car and post more pictures of it when you can.

 

[Stanglover]

Hello and welcome from SW Ontario, Canada.
You'll get lots of help here, so ask questions before discissions are made would be my advice.
As for cheap, well that depends on where you want to go with this project. It's the little stuff that costs most oftentimes.
Good luck and please post more pics.

 

[Steve McMahan]

Welcome from Fort Mohave Az and So Cal. Where are you in Az? That diff looks like the dust on all of my Az patio furniture. Yes, tell us your build plan and more pics. I assume someone replaced the rear end to get rear disk brakes? Welcome!

 

[Hemikiller]

That's bizarre. The WER rear axle was used in the full size Fords as the "light duty" axle. Had no clue that they also used it in the Granada/Monarch line - yet there it is.

 

[1973 Mach-1]

Welcome to the group, from Phoenix!

 

[73 mach 1 1962]

Well, that's a mess!

Seriously, welcome to the forums and howdy from Texas! You'll find plenty of helpful advice and encouragement from the members here.

What do you mean by total restoration? Are you looking at taking it down to a bare shell and bringing it back for a concours level restoration, or are you thinking more of a mechanical and cosmetic restoration for a cruiser, cars and coffee car? If you cruise through the build threads in https://7173mustangs.com/discussion-forum/mustang-registry-project-build-threads.78/ you'll get some good ideas. You can ask questions of those that have been down that road before you. Check @tpj71mach for a recent build.

It looks like your 73 has the competition suspension, is it a Mach 1? Tell us more about your car and post more pictures of it when you can.

By total restoration, I mean its original, it was sitting in AZ heat for 20 years any thing rubber is Shot and in need of replacement. I am going to start with Mechanical work them go to cosmetics. 351 W and staggered shocks

Hello and welcome from SW Ontario, Canada.
You'll get lots of help here, so ask questions before discissions are made would be my advice.
As for cheap, well that depends on where you want to go with this project. It's the little stuff that costs most oftentimes.
Good luck and please post more pics.

By Cheap I mean not looking to make a race car out of It!

 

[73 mach 1 1962]

Welcome to the group, from Phoenix!

Thanks! Nice Yellow!

 

[73 mach 1 1962]

That's bizarre. The WER rear axle was used in the full size Fords as the "light duty" axle. Had no clue that they also used it in the Granada/Monarch line - yet there it is.

View attachment 95339

I was scratching my head too!! Looking to replace it with a Ford explorer rear w/ disk brakes, the Granada has drums!

 

[will e]

Welcome from Phoenix! (Actually Mesa) What area of the State do you reside?