- Joined
- Jul 5, 2013
- Messages
- 1,110
- Reaction score
- 624
- Location
- Jonesborough, TN
- My Car
- 1973 Mustang Mach 1
I have the rear window installed and everything looks good, except that on the passenger side, there is a gap where the gasket wants to stick up about 1/16" or so from the glass. I can roll it over and it lays down, but when released it pops back up. I have not yet installed bedding compound. I don't know if that will help hold it down, or if it matters. Will the gasket sticking up a tiny bit like it is, interfere with the trim installation? Any ideas or suggestions would be appreciated.
Last edited: