- Joined
- Nov 7, 2013
- Messages
- 1,640
- Reaction score
- 388
- Location
- Amsterdam, The Netherlands
- My Car
- 1973 Mustang Grande 351C 2V, built on the very last production day (July 6, 1973) for Grande's.
Hi folks,
Last night I removed the trim around my windshield. I thought it would just be held in place by the clips but some PO found it neccesary to also put insane amounts of sealant under the trim and in between the glass and A-pillar. Having a look, the rust I found here and there made me think how there actually should NOT be any sealer under the trim so that water can run down underneath the trim.
Who knows if sealant is supposed to be underneath the trim or not?
Thanks,
Vincent.
PS: I'm not talking about the sticky stuff underneath the glass.
Last night I removed the trim around my windshield. I thought it would just be held in place by the clips but some PO found it neccesary to also put insane amounts of sealant under the trim and in between the glass and A-pillar. Having a look, the rust I found here and there made me think how there actually should NOT be any sealer under the trim so that water can run down underneath the trim.
Who knows if sealant is supposed to be underneath the trim or not?
Thanks,
Vincent.
PS: I'm not talking about the sticky stuff underneath the glass.