***Purist Warning Statement***
Pictures shown below may not be appropriate for purist viewing. Pictures may cause nausea, vomiting and/or a general feeling of uneasiness. If you experience these feelings, step away from the computer...and run...run real fast and real far. rofl
I purchased a Deluxe Shifter Console Plate from Don at OMS a few months ago. (along with many other interior replacement parts)
I've been prepping all the parts, door panels & all associated parts, floor console (power ports, cup holder & power window rocker switches), dash LED conversion, etc in preparation for the final assembly of my Mach 1. Car is very nice but is a non-numbers matching Q-Code 73 Mach 1. If it were a #'s matching car, I wouldn't have been interested in the first place.
Engine builder is "almost" complete. (12 weeks on a 5 week build) I've been bugging him almost daily... This is certainly a non #'s matching 408 Stroker.
Door panels look great. Don (Ohio Mustang Supply) gets them from a supplier that manufactures a top notch product. Everything fit perfectly. (a little patient massaging required) Supplier name is top-secret proprietary information...if I told you the name...I'll show pics of that later.
I just got finished with the mock up of a switch panel which I made out of a piece of donor camera case (an old trashed panel piece) and six 12v switches. These will control some modern amenities such as rear backup camera, monitor, acc rear light, navigation, 12v usb ports-front & rear, and fan (radiator). The two outer switches are single pole-double throw (two options for power source) and the 4 middle are normal single pole-single throw.
More to come...
Pictures shown below may not be appropriate for purist viewing. Pictures may cause nausea, vomiting and/or a general feeling of uneasiness. If you experience these feelings, step away from the computer...and run...run real fast and real far. rofl
I purchased a Deluxe Shifter Console Plate from Don at OMS a few months ago. (along with many other interior replacement parts)
I've been prepping all the parts, door panels & all associated parts, floor console (power ports, cup holder & power window rocker switches), dash LED conversion, etc in preparation for the final assembly of my Mach 1. Car is very nice but is a non-numbers matching Q-Code 73 Mach 1. If it were a #'s matching car, I wouldn't have been interested in the first place.
Engine builder is "almost" complete. (12 weeks on a 5 week build) I've been bugging him almost daily... This is certainly a non #'s matching 408 Stroker.
Door panels look great. Don (Ohio Mustang Supply) gets them from a supplier that manufactures a top notch product. Everything fit perfectly. (a little patient massaging required) Supplier name is top-secret proprietary information...if I told you the name...I'll show pics of that later.
I just got finished with the mock up of a switch panel which I made out of a piece of donor camera case (an old trashed panel piece) and six 12v switches. These will control some modern amenities such as rear backup camera, monitor, acc rear light, navigation, 12v usb ports-front & rear, and fan (radiator). The two outer switches are single pole-double throw (two options for power source) and the 4 middle are normal single pole-single throw.
More to come...