Shock tower upper control arm not straight

[Robsweden]

Hi

I did a four Wheel aligment yesterday, with new suspension parts it came ok. But the shop manager noticed that my Wheel on the driver side is 5-7 mm forward than the one on the passenger side. He looked at the upper Control arm and it seems like its not straight into the Tower. I Went home and looked at it, it seems like the metal itself is a Little bit further in on the the hole I marked in the Picture.

Okay options remove the Control arm and try to heat or bring the metal back.

Put a shim on the other bolt in the Control arm so its straight. Can this be done ? should I shim out the passanger side to ?

Regards Rob

 

[mustang7173]

Hello Robsweden,

Take look at this forum thread. I would get the shims and let the front end Tech insert them in to fix the alignment issues.

https://www.7173mustangs.com/thread-anybody-here-ever-shimmed-their-upper-control-arms

 

[Robsweden]

Hello Robsweden,

Take look at this forum thread. I would get the shims and let the front end Tech insert them in to fix the alignment issues.

https://www.7173mustangs.com/thread-anybody-here-ever-shimmed-their-upper-control-arms

Great Thanks

Regards Rob