Very good cam article.

[c9zx]

Very good article. Clear and to the point as well as being accurate. If you are looking to do a cam change read this first. Chuck

https://www.hotrod.com/articles/similar-duration-cams-may-perform-differently/

 

[TommyK]

In my mind this article lays out the case for why it is worth the extra 100 bucks or so to get a custom cam from a supplier/builder who is familiar with the engine platform you are working with, even on a mild build.

 

[c9zx]

+1 on TommyK's comment. Chuck

 

[Don C]

Yes, good article. I agree, too, about getting a custom cam. I researched most of the available off-the-shelf cams and the only two that came close to what I want were one from Lunati and one from Howards. But, I'm not playing horseshoes, so will likely be one from Brent Lykins.

 

[c9zx]

Brent is a good guy and does excellent work. Chuck

 

[stax359]

I got mine from cam research..

 

[jmohring]

Wow this article is exactly what I've been looking for after trying to figure out what cam I needed for the last week. Since I'll get it custom iit also means it will be one of the last components I probably purchase for this car...

 

[Don C]

Make sure you get the cam from someone that understands Cleveland heads, otherwise you'll likely get something better suited for a Chevy.

You might want to also read this article, about Q code heads and performance.

COBRA JET: Unleashing The Performance Capabilities Of 351 Cleveland Engines With Open Chamber 4V Heads (Q Code) | The De Tomaso Forums (infopop.cc)