philt
Well-known member
- Joined
- Jul 4, 2012
- Messages
- 178
- Reaction score
- 1
- Location
- Orlando, FL.
- My Car
- 1972 R code Mach1. Being resto moded.
In order to get 34530R20's under the KigerStang, I need 15" of wheel space by16" Radius deep wells.
First thing that must be done is replace the rear frame rails and position them inside and parallel. This affords two more inches of width in the front and 4" in the back. The wells Im using are 34" diameter by 15 wide 16" deep.
According to my measurements the new wells will accomodate 14" by 31" high tire. Plenty of room for those ZR1 tires.
Once I get the new frames welded and braced up, I'll cut out the old outer rails and post some pics of the new wells installed. Hopefully be done by Sunday.
First thing that must be done is replace the rear frame rails and position them inside and parallel. This affords two more inches of width in the front and 4" in the back. The wells Im using are 34" diameter by 15 wide 16" deep.
According to my measurements the new wells will accomodate 14" by 31" high tire. Plenty of room for those ZR1 tires.
Once I get the new frames welded and braced up, I'll cut out the old outer rails and post some pics of the new wells installed. Hopefully be done by Sunday.
Last edited by a moderator:
