WTB parts

[71dragmach]

I need the front parking lights for a 71. Someone took the lights out and cut the wiring with them. So I need the lights and the wiring. Also need a hood latch and the bracket that goes from the grill to the hoodlatch support.

Thanks Jesse

 

[OMS]

The parking lights [ in the valance ] have a 6 - 8 inch section of wire and plug on them.

Is the plug on your car or did they cut it off?

Or do you mean the grille / sport lamps?

Grille bracket questions

Mach 1 or standards grille

Early 71 dual mount or late 71 single mount?

I should have all those parts.

Don

Ohio Mustang Supply

440-949-2556

VISIT US ON THE WEB AT

www.ohiomustang.com

 

[71dragmach]

The parking lights [ in the valance ] have a 6 - 8 inch section of wire and plug on them.

Is the plug on your car or did they cut it off?

Or do you mean the grille / sport lamps?

Grille bracket questions

Mach 1 or standards grille

Early 71 dual mount or late 71 single mount?

I should have all those parts.

Don

Ohio Mustang Supply

440-949-2556

VISIT US ON THE WEB AT

www.ohiomustang.com

The lights in the valance. They cut the wiring out of the wiring harness,so I need the lights and the pigtails to wire them back in. On the grill it is a mach1 grill but I am not sure if I need early or late.

Jesse

 

[firesign73]

If you are still in need of the valance lights contact me. Mike 740-617-2425

 

[ManniB]

The parking lights [ in the valance ] have a 6 - 8 inch section of wire and plug on them.

Is the plug on your car or did they cut it off?

Or do you mean the grille / sport lamps?

Grille bracket questions

Mach 1 or standards grille

Early 71 dual mount or late 71 single mount?

I should have all those parts.

Don

Ohio Mustang Supply

440-949-2556

VISIT US ON THE WEB AT

www.ohiomustang.com

The lights in the valance. They cut the wiring out of the wiring harness,so I need the lights and the pigtails to wire them back in. On the grill it is a mach1 grill but I am not sure if I need early or late.

Jesse

Maybe the following picture helps in determining what grille bracket you need:

http://429mustangcougarinfo.50megs.com/mustang_exterior.htm

Scroll down to Hood Latch Support.

Regards, Manfred