Bruce180vf
Member
I have installed a toploader 4 speed with a Tilton 6000 series throwout bearing and a Wilwood 13/16 master cylinder. The problem I am having is I can bleed the system and drive it. It works great for about a half an hour then it will gradually stop releasing the clutch. No amount of pumping the clutch pedal will it go into gear. I have to crank start it at stop lights. I can up shift using the throttle and clutch. Forget it if you have to down shift. It isn't going to happen. Has anyone else ran into this? I have a vacuum bleeder and tried the pumping the pedal and holding it down method also. Still the same result.