AUSTIN VERT'S TRANNY REBUILD.

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 27, 2012
Messages
3,085
Reaction score
438
Location
Brisbane - Australia
My Car
1973 Mustang Convertible
Hi to all,

This post is a follow up on my recent post, Austin Vert's Engine Rebuild From Hell. In that post, i mainly talked about the bad experience i had in deciding to rebuild my 302 Windsor motor. I also touched on and mentioned that my stock factory standard C4 Auto Transmission, had decided to start playing up for the first time ever, when shifting into third gear from second when going up steep hills. This problem started to happen around two years after the motor was rebuilt. The motor was dyno tested on and off the car, and the specs showed 400 ft lbs and 410 hp at the flywheel. At the rear wheels, the Dyno test showed 347 hp. All good.

I consider myself fortunate, because i have a Transmission specialist who i have known and has operated his company locally for the last 42 years or so. He is one of the best Transmission go to guys in Australia. We had a chat a few months ago regards my slipping issue, and we both agreed it was time to rebuild the tranny for the first time, and beef it up to meet the higher powered engine's output. In my ignorance, i thought the standard C4 would handle the extra engine power. Nobody ever told me it would not.

I have just come away from the trans rebuild yesterday. I am noticing a difference in the performance already when driving around, as the trans is now shifting gear more positively, smoother, and has no time lags when shifting gears. Great! It should now take the pounding the extra horses and torque the engine is throwing at it. What i found interesting was i ended up talking with the team who worked on the rebuild. I asked them what overall condition they thought the trans was in when they pulled it down. Bare in mind that my car had only 35,000 genuine miles on the clock when i bought it back in 2011. It now has 41,000 miles clocked up. It has also been looked after well all it's life. They told me that the trans was in overall fair condition, but had a few issues regards age and wear, and therefore would have needed to be pulled down and rebuilt anyway regardless of the upgraded engine or not. I found that interesting, as in my mind, i thought that these transmissions were bullet proof, and more or less went on forever without needing rebuilding. Silly me.

I guess it shows that with any old car, all parts will eventually age, wear out, fail or deteriorate, and it's a non stop exercise replacing or refurbishing them as the years roll on one way or another. So to finish up, i have included a list of parts needed to rebuild my tranny below. This will mean something to all you transmission tech savvy guys out there, but not a lot to me. The other thing to mention is that labor costs for any mechanical work done here in Australia, have become quite expensive over the years. I am confident that a good quality job was done on my trans rebuild, but my hip pocket nerve took a heavy beating, as the final bill came to $4,095.00 Australian, or $2,981.00 US Dollars. OUCH!!!!!!!!! I also decided to replace the complete steel transmission fluid lines with steel, plus purchase and connect a small separate trans cooler with thermo fan, as well as running the trans fluid cooling through my main radiator. With the trans rebuild now out of the way, this now means that close to 97% of all the mechanical components in my '73 Vert has either been refurbished, rebuilt, or been replaced since 1973.
(Braking system, engine, transmission, differential, cooling system, front and rear suspension, steering, fuel system etc) Owning my '73 has proven itself to be a very enjoyable, rewarding hobby for me over the years in so many ways. The downside is that it is a hobby that comes with a high price tag. But as they say, what price can you put on the experience of owning and driving these old and fun cars!

Cheers,

Greg.:rolleyes:
 

Attachments

  • Trans Invoice for Austin Vert.jpg
    3.3 MB · Views: 11
  • 2022-03-13 00_44_29-Window.png
    2022-03-13 00_44_29-Window.png
    237 KB · Views: 11
Last edited:
Ouch, that hurts. The HD planetaries are expensive, about $300 each USD. The external cooler and line replacement would add a fair amount of time to the job.

These units don't last forever, seals harden and crack, heat causes the clutch and band friction material to harden and crack etc. I'm surprised it lasted 50 years in functional condition.
 
Ouch, that hurts. The HD planetaries are expensive, about $300 each USD. The external cooler and line replacement would add a fair amount of time to the job.

These units don't last forever, seals harden and crack, heat causes the clutch and band friction material to harden and crack etc. I'm surprised it lasted 50 years in functional condition.
Dead right Hemi!!
 
Ouch 🤕

Such bills are hard, even with a car, that is not your daily driver!

Hope all goes well with the result of your tranny rebuild and it doesn't will end up like your engine story...

Now, you must have almost everything restored or renewed on your car?
 
Ouch 🤕

Such bills are hard, even with a car, that is not your daily driver!

Hope all goes well with the result of your tranny rebuild and it doesn't will end up like your engine story...

Now, you must have almost everything restored or renewed on your car?
Hi Tim,
Hope you and Mustang are keeping well. Thanks. Yeah, the cost is a hard pill to swallow. I have poured way too much money into this car, that i will never get back when i eventually stop driving through old age and sell it on. But as i said above, some things in life that bring huge joyus rewards are worth the money spent. What price can you put on happiness. Regards the donk - again i will have to play a wait and see game as to whether it will settle down with the oil consumption thing or not. I think blowing no smoke is a good omen at this stage. Regards everything restored - as i said above, you are never finished with these old cars, as something ongoing is always breaking down, and needs repair or replacing through the aging process. However, i would like to respray the whole car, freshen up a few body parts, replace the two front seat covers, and maybe install power windows. That would see the car pretty much finished off or up to date. What about yours in that regard.

Greg:)
 
Back
Top