Edelbrock carb and kickdown linkage

RIBS said:

My 1405 and C4 302 required an intermediate Edelbrock linkage part added to side of carb and a 2 inch extension of the kickdown lever, Edelbrock sells both as add on parts…this also moved the throttle cable out over the valve cover, and a new throttle cable bracket was hand crafted….or you can pay more than the cost of the Carb for a LOKAR kickdown, throttle and gas pedal setup.

Click to expand...

markafss said:

Thanks for your reply, but I really need to see how those are attached to the carb and transmission kickdown rod. If you are able, could you please take a picture with your phone ( close up) and post here. I have all the adapters, but I have been unable to make them work properly. I really need to SEE how yours is attached if possible. TIA

Click to expand...

RIBS said:

I have cleaned mine up a bit since this and my throttle cable bracket is custom, the kickdown adapter attaches to linkage, and the rod tension connects to it, and the throttle cable connects on the very outside using ball….it needs a redo to clean up position and angle but you get the idea….

Click to expand...