Added power locks and needing a solution for the rubber boots between door and interior. Thanks
Door wiring boots
- Thread starter CalgaryChris
- Start date
Help Support 7173Mustangs.com:
- Joined
- Jan 20, 2022
- Messages
- 1,517
- Reaction score
- 2,465
- Location
- Homer Glen, Il
- My Car
- 1971 Mustang Mach 1 351c M-code FMX trans and 9 inch rear end
I was able to find a nice set of conduits on eBay and dilled out the door and pillar for them. There are dimples in the sheet metal where you need to drill. I used a caliper to measure the outer diameter of the boot at each end to determine the size hole I needed to drill into each. They vary in size slightly from the pillar to the door. I had the luxury of the doors being off of the car when I did it, though.
Attachments
- Joined
- Jan 1, 2012
- Messages
- 8,521
- Reaction score
- 1,388
- Location
- Eugene, OR
- My Car
- 1971 Mustang Sportroof M code
You might try what this fellow member came up with:
https://7173mustangs.com/threads/austin-vert-finds-good-door-rubber-bellows.25681/#comment-262945
Then, there's these:
https://www.cjponyparts.com/detroit-speed-door-jamb-wiring-boot-kit/p/DJBK-V/
And then there's these from LMC Truck, probably the best deal I found, part #47-1025, door conduit, $8.95 each
https://www.lmctruck.com/body-components/exterior-rubber/fd-1980-96-exterior-rubber-components
https://7173mustangs.com/threads/austin-vert-finds-good-door-rubber-bellows.25681/#comment-262945
Then, there's these:
https://www.cjponyparts.com/detroit-speed-door-jamb-wiring-boot-kit/p/DJBK-V/
And then there's these from LMC Truck, probably the best deal I found, part #47-1025, door conduit, $8.95 each
https://www.lmctruck.com/body-components/exterior-rubber/fd-1980-96-exterior-rubber-components
Last edited:
- Joined
- Aug 5, 2019
- Messages
- 2,453
- Reaction score
- 2,834
- Location
- Texas
- My Car
- 72 Mustang Q-code
70 Mach 1 M-code
That LMC part is a good find, Don. Thanks for sharing that one.
Thanks. Top notch search skills Don as usual.
Similar threads
