Search results

On the lower part of the fender towards the front of the fender bolt hole directly behind the wheel I cannot find anything to bolt the fender to. I'm sure there's something missing. I could Google it and search for days and days but I know somebody here could tell me exactly what it is. The...

Hello, I am looking for a used 1973 Mach One grille assembly with all the moldings, emblem, lamps and headlamp trim. Any help would be greatly appreciated. You can email pics to [email protected] or post them here. Thanks.

Hey guys it’s been a while since I’ve posted. My Mustang project was put on hold for a few years and I just finally got started back on it. The good news is I got the engine running and boy it runs great. I’m having problems cranking the engine from the key switch. I can start the car by jumping...

  Hey everybody. I’m gettin started back on my ‘73 Mach One after years of it just sitting. I had to many projects going on. I’m at the point where I’ll be installing a HEI distributor and a fender apron mounted starter solenoid. The new HEI has a yellow, red and black wiring coming from the...

I found this piece of white plastic when I took off the valve body in my '73 Mustang c6 transmission. I could kinda see where it came from on the main shaft. It this white plastic part important?

I have a '73 Mustang with a 460 and a c6 bolted to it with the long tailshaft. I've already fixed the transmission crossmember problem. Well I found a nice c6 transmission out of a 72 Mustang 351 today for $250 and was planning on swapping out the shift levers. Would the c6 I bought today bolt...

Well I've come to the part I dread....wiring. This is a pic of the wiring harness that goes in front of the motor and up by the solenoid. I installed a new solenoid and a single wire alternator and one of those GM type electronic ignition distributors. I could use any help identifying these wire...

I found a small piece of metal in the trans pan of my C6 transmission. Kinda looks like maybe the tip of a lever. I couldn't see where it may have broken loose. I bought the trans with a 460 attached and just dropped them in my '73. Still a few weeks from starting and driving for the first time.

Hi everyone, my C6 transmission has the shifter lever on the side of the transmission setup for a column shift but I need the lever for a floor shift. Does anyone have one they might sell me? Thanks in advance. I have attached a photo of the lever.

Hey guys, I'm looking for a power steering pump bracket for my '73 with a 460. It's the one that bolts to the motor. I'm sure any 70's 460 or 429 bracket would work. I have attached a picture. Any help would be appreciated.

Hey guys, I am looking for a tailshaft housing for my Ford C6 transmission. These are some pictures of the old one that came off of the transmission. Is doesn't have any studs or holes for the rear transmission crossmember. I'm looking for a tailshaft housing just like this but with the...

http://muscle-hp.blogspot.com/2013/10/car-crash-ford-mustang-mach-1-destroyed.html

Well, I finally found a fan shroud but it's for a 1973 Mustang with the 351 and I have a 460 installed in my 73. Now I need to find a fan blade. What would you suggest? Should I look for a fan blade for a 429-460 or a 351? I don't think the 351 blade will fit over the water pump shaft of the 460...

Hey guys, I have a 1973 Mach one that I bought with no engine and dropped a 460 in and now I need to buy the fan blade, clutch and shroud. Does anybody know if the OEM fan blade, clutch and shroud for a 351 will fit this 460? The car originally had a/c. I've searched for these parts on a 1971...

Hello, I'm searching for a transmission crossmember for a 1973 Mach One 429/460 with a C6 transmission and all the linkage and brackets for the automatic shifter.

This is the transmission that came with the 460 I bought. I've installed both the engine and transmission but need to figure out which crossmember and shifter linkage I will need. Exactly what kind of transmission is this? eBay has crossmember a for $99 that looks like what I need. Is this an...

Hi everyone, my name is Robbie. I'm just now getting back into putting together my 73 Mach One after a long break. There's a lot of great info here and appreciate any advice you guys give me. I bought the car for $1500 and was in really good shape but was wrecked. I replaced the strut...

Hey everybody. I'm new to the forum. I just bought a 73 Mach One that was wrecked and the strut rod crossmember was bent and will require replacing. Anybody have any suggestions on where I could find one of these? I've tried most of the local Mustang places here in Alabama with no luck so I'm...