1971 351c-4v w c6 flywheel

[FastEddie]

I've done a lot of searching and it seems like the part I need is D1zz6375a but is there anyway to confirm that? Got some bad teeth and want to replace but reading lots of stories of the wrong one causing issues. I looked at it and didn't see a part number on it. Any help appreciated.

 

[Jeff73Mach1]

I have one that I got on a spare engine I bought several years ago. (The block is now in my car-lol)

It was on a 2v engine with an FMX-if it will fit you can have it for shipping and a $15.00 donation to the site

 

[FastEddie]

I have one that I got on a spare engine I bought several years ago. (The block is now in my car-lol)

It was on a 2v engine with an FMX-if it will fit you can have it for shipping and a $15.00 donation to the site

Thanks but not sure it will fit. From what I read there was differnce with c6. Not my area of expertise however....

 

[Don C]

Most aftermarket flexplates fit more than one transmission.

http://www.summitracing.com/parts/tci-529628/applications/make/ford?prefilter=1

The things you need to look for are the bolt spacing, balance, and number of teeth.

 

[Bill73Ragtop]

Take the original to a machine shop and have them sweat a new ring gear onto it. Should be relatively inexpensive.